K Conversions 2011 offering

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
Drunkn Munky
Site Supporter
Site Supporter
Posts: 6313
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent
Re: K Conversions 2011 offering

Post by Drunkn Munky »

ludacris wrote:looks like tyga now offers a carbon kevlar sleeve

http://tyga-performance.com/site/produc ... ts_id=1737
58mm inside diameter, no good for NC cans :(

HRC cans are 86mm, i want nearer 100mm :pray:
Top
ludacris
Settled in member
Posts: 244
Joined: Fri Sep 17, 2010 1:06 pm
Bike owned: NC35
Location: Australia
Re: K Conversions 2011 offering

Post by ludacris »

aaah i see...why don't you get one made up for you?
Top
User avatar
Gavin jap4
Site Supporter
Site Supporter
Posts: 638
Joined: Sat Jun 28, 2008 6:57 pm
Bike owned: NC35 NC29 MC28SP MC21 SP1 916
Location: Manchester UK
Contact:
Contact Gavin jap4
Re: K Conversions 2011 offering

Post by Gavin jap4 »

Drunkn Munky wrote:
ludacris wrote:looks like tyga now offers a carbon kevlar sleeve

http://tyga-performance.com/site/produc ... ts_id=1737
58mm inside diameter, no good for NC cans :(

HRC cans are 86mm, i want nearer 100mm :pray:

they are for the two stroke cans
Top
User avatar
Drunkn Munky
Site Supporter
Site Supporter
Posts: 6313
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent
Re: K Conversions 2011 offering

Post by Drunkn Munky »

ludacris wrote:aaah i see...why don't you get one made up for you?
Belive me ive tried, you know of anyone that can help?
Top
ludacris
Settled in member
Posts: 244
Joined: Fri Sep 17, 2010 1:06 pm
Bike owned: NC35
Location: Australia
Re: K Conversions 2011 offering

Post by ludacris »

would any of these guys be worth a shot if you haven't already tried them

http://carbonfibretubes.co.uk/

Pretty sure I read that you can order carbon/kevlar from them

or

http://hardyadvancedcomposites.org/default.aspx

from what I read on their site, they seem to have a minimum quantity amount so maybe a group buy

or maybe these guys

http://www.pjengineering.co.uk/index.asp

they say you can choose various woven materials so I assume they could do carbon/kevlar

or

http://compositeenvisions.com
Top
User avatar
Drunkn Munky
Site Supporter
Site Supporter
Posts: 6313
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent
Re: K Conversions 2011 offering

Post by Drunkn Munky »

Ive tried PJ's and the top link and from what i remember i got a rather abrupt NO as a answer. I'll give that middle link a go.
Top
User avatar
micpec
Site Supporter
Site Supporter
Posts: 1298
Joined: Sat May 03, 2008 9:11 pm
Bike owned: NC35’s, NC30 sold, MC34 many
Location: The Netherlands
Re: K Conversions 2011 offering

Post by micpec »

Tony, I'll be interested in the outcome for your request to that middle link ;) Basicly I need 2 kevlar tubes (near 100mm, but maybe near 98.5mm inner width and as length +/- 400mm each... :whistle:
"Action without Philosophy is a lethal weapon; Philosophy without action is worthless"
Top
Claytonbojo
Settled in member
Posts: 93
Joined: Fri Jul 16, 2010 5:41 pm
Bike owned: VFR NC30 NSR125, Pit bike 200C
Location: Worth Sussex
Re: K Conversions 2011 offering

Post by Claytonbojo »

I dont no if this is any help but try this


http://cgi.ebay.co.uk/Carbon-Kevlar-Clo ... 53e30ebfde
Top
iArGod
Settled in member
Posts: 70
Joined: Wed Feb 23, 2011 1:21 pm
Bike owned: NC30
Location: Devon
Re: K Conversions 2011 offering

Post by iArGod »

ew noty.
:down:
Top
iArGod
Settled in member
Posts: 70
Joined: Wed Feb 23, 2011 1:21 pm
Bike owned: NC30
Location: Devon
Re: K Conversions 2011 offering

Post by iArGod »

Gavin jap4 wrote:look at how the front fender fits on ZIP ties (minimal prep work my arse)
Well spotted
Top
Post Reply

Return to “Honda - Graphics & Style”