Drunkn Munky wrote:I cant see her problem to be honest, think you need to sit her down on that couch and explain the finer details of itailian motorcycles to her

and if she still doesn't get it, fetch her upto mine for a history lesson.
also can i suggest before you buy any more carbon on ebay (unless its proper MS Production stuff) buy this instead
http://cgi.ebay.co.uk/Ducati-916-Haynes ... 1142wt_905
and this
http://cgi.ebay.co.uk/Ducati-Desmoquatt ... 403wt_1139

CRM wrote:

Drunkn Munky wrote:I cant see her problem to be honest, think you need to sit her down on that couch and explain the finer details of itailian motorcycles to her

and if she still doesn't get it, fetch her upto mine for a history lesson.
also can i suggest before you buy any more carbon on ebay (unless its proper MS Production stuff) buy this instead
http://cgi.ebay.co.uk/Ducati-916-Haynes ... 1142wt_905
and this
http://cgi.ebay.co.uk/Ducati-Desmoquatt ... 403wt_1139

Will do matey

Got my eye on a ms production airbox at the minute


Kris

one from our friend in germany per chance ? thats the ticket mate. MS production is the proper stuff to buy. the carbon weave all goes in the same direction no matter what part / panel you buy and always lines up.

CRM wrote:

Drunkn Munky wrote:I cant see her problem to be honest, think you need to sit her down on that couch and explain the finer details of itailian motorcycles to her

and if she still doesn't get it, fetch her upto mine for a history lesson.

and i've had this history lesson over a few bottles of becks and it's well worth it ...




....cause now i want a ducati
did i just say that out loud !

Yeah it is Germany! Missed a set of ms carbon air tubes last week too!

I've been very restrained so far just the carbon clutch cover!

Paul talk to me about rental sprocket carriers!

I've just ordered standard size renthal front and back and the carrier!

But heard the renthal carriers mash up the cush drive also the Cush drive pops out if you don't drill and tap them!

You have renthal on yours, any probs??

erm i did, then i went back to standard after the cush drive rubbers backed out and left me with a fine alloy powder on the rear of the arm and hub. it slowly grinds the hub teeth away. genuine stuff has its moments too but does last quite a while.
916 and 748 go down one at the front or up two on the rear, 996 has enough welly to pull the OE gearing just fine.

Hehe! Guess I should have emailed you before I bought them! Oh well I will fit them and use it and see how it goes!

Kris

http://shop.ebay.co.uk/i.html?_nkw=duca ... m270.l1313#

Love the Ducati Kris, if i had my way all my bikes would be in the house and my girlfriend would stay out of the way in the garage!

I thought i had got over the ducati thing with my yamaha but now i want a ducati again after seeing yours.