I believe Graeme France has them in stock :)

on topic, i havent had the time to play around with the clock so far but a mate suggested that one way to reset the needle on my unrestricted speedo would be to make a mental note of the registered speed at an actual speed, say 50mph for example, take the clock face off, move the needle to the noted speed, brace the needle shaft and remove the needle itself, then place the needle back in the position on the actual speed it should have read.

Worth a go, failing that ill get a kph clock and healer but id rather save myself the 60 odd quid and have a go myself first

leopard_pagan wrote:i have templates to make your own clock faces.
BUT .. they are for the NC29....
i do not know if the NC23 has the same increments as the NC29?
IF SO... i can send you the template to print off and just slot over the ones you have now.

hello l/p could you email me the templates please .
lloydiecbr@yahoo.co.uk
thank you

an assortment of formats heading your way.....

thank you l/p

Hello,
Does anyone know if CBR400 NC29 speedo will fit an RVF400 NC35?
I am after a MPH speedo for my RVF.
Cheers

please read your other post...

http://www.redialuk.co.uk" onclick="window.open(this.href);return false;

Thanks or the reply, I have already tried redial and got no response. I read another post that others have failed to hear from them and that they are no longer trading.
I know what you are saying about the face, if I just established which one to use!

aaarr... now thar lays the murkey waters.

the templates i have are ONLY for a NC29 speedo.
I know for a fact that VFR speedo dial has the speed increments in a different place to the NC29s face.
if you were to fit a NC29s face to your NC35.. it would probably read all wrong.

the best and closes bet is to look for a VFR/NC30 face, what about a MPH sticker over lay? i know i hate them but it will do until you find what you need.
or just buy a good 2nd hand dash.. Rick Oliver or Graeme France or ebay are the best places to go.

not surprising redial have gone, their customer service was shite. 2yrs ago i asked about sending artwork in for a set of dials.. i never got a reply! phoned in and they chap i spoke to hadent a clue on file formats needed!

Leopard_pagan, I'd love a copy of the dial templates, any chance?

mouldman@hotmail.com

Thanks

sent with subject: CBR dials.