Fitted some crash protectors, here's a few photos:







Still to do:
Receive and fit lower rad arm
Clear double double (hopefully straight)

Out to Matlock with Jetblack, this is the only photo I took! Thing he got a couple more

more photos:
viewtopic.php?f=8&t=42555&start=10

Unfortunately missed Gavin when I phoned him today then when he phoned back I was busy. Hopefully be able to order a clear double bubble tomorrow and maybe a new screen brace.

So just got off the phone to Gavin, didn't go for the screen brace (couldn't justify the price for that right now) but did put in an order for the clear screen, says he hasn't got any in stock but will beg getting in contact with Tyga.

Nice looking bike

So had the fairings off this afternoon, fitted the lower rad arm, headlight surrounds and some DNA dots.
Photos of headlight surrounds:
Before:

Without nose:

Left:

Right:

I'm going to move both joints round to the top to make them less visible next time it's off. Also gave the chain and bike a clean.
Images of lower rad arm here:
viewtopic.php?f=24&t=42236&start=10

Quick work Ben!

Nice one.

Are those home made headlight rubbers Ben? - nice job if so...

benny wrote: put some Velcro to attach the main seat with.

- whats up with the bolts ???

NGneer wrote:Are those home made headlight rubbers Ben? - nice job if so...

benny wrote: put some Velcro to attach the main seat with.

- whats up with the bolts ???

Thanks - are indeed, hence the shoddy overlap joint.

Velcro was due to nuts not having arrived from Alex yet and the wobbly seat was annoying me, mums a soft furnished so we have rolls of sticky back Velcro, really should of properly cleaned the frame and seat first though so that job needs redoing. Makes access under the seat easier too.

Went to Melton Mowbry today (120km ride) and almost now past the 1000km point!
Just drawn these which hopefully Kayla can make