• UK NC carb jetting.....

Posted: **Sun Dec 02, 2012 10:31 pm**

zelovski wrote:Good evening Guys,

I may be dull but i think my case is a little special : I have a 92 JDM bike with carbs which must be french spec ones.

Main jets are 120 / 122, needles are J3UF / J3UG, 4 / 5 holes emulsion tubes, red ring slides with 3 holes.

I'm running a full system.

What would be your advice regarding front / rear positons ?

Sounds identical to UK carbs (except for needle codes) so just follow that.

Posted: **Mon Dec 03, 2012 10:28 pm**

All right Cammo, thanks for the answer, I will let you know how it works.

UK NC carb jetting.....

Re: UK NC carb jetting.....

Re: UK NC carb jetting.....