Mr dog, they always sound so helpful on the phone? Never bought anything from them maybe service is not so good!
Mark

never had a problem with em before

but am getting the right runaround this time
ordered on the 8th, dispatched on the 10th, and nuthin yet
checked with the sorting office and no outstanding packages for my address, same with neighbors
now i have to leave it till the 24th and if i still aint got em e-mail again

watch this space

do you still have their phone number?

Sure it's 01273 597072

nice one mark cheers
i'll try em in the morning
as i said never had a problem before
but this is taking the piss especially with this lovely weather were havin in costa del dorsetshire
ordered loads of bit's for the winter re-fit but the only things that aint turned up are the bit's i need to fit now to enjoy the warm weather
by the time they turn up we'll be knee deep in snow

I know what you mean, funds allowing I been out every day, slightly colder today but still great! BLW I ride down your way quite often to a place called West Bay, near Bridport!

that's a good ride
we usually go from poole to weymouth then up the old coast road to west bay,

It's probably the tiny bleed hole in the master cylinder is blocked or the master cylinder piston it a little bit pushed in (i.e. past the little bleed hole) due to the brake lever being wrong ot having an adjustrment screw too far in. Blow some compressed air down the tiny little hole, clean everything and bleed in completely new fluid.

well i phoned monday and the nice man at wemoto put another set in the post and i got em today

although the seal kit i received is for
"FZS600 - FZS1000 fazer - TDM900 - YZ R1 - BT1100 bulldog or FJR1300"

anyone know if this is right as i don't want to strip the calipers down only to find they don't fit

Edit
had a quick google session and think they should be ok
pistons small 27mm
piston large 30 mm
which is what i got and the same as the tj methinks

Hope they are right!! I would say that those bikes listed have the same brakes as I have owned all of them lol But I would ring them to make sure as I have my doubts they are the same, but what do I know?

It's the piston sizes and therefore the seals that are common not necessarily the calipers.