I've a few
1x tsr sp style
2x ethos half systems ,single cans
2x standard systems,one cut, one not
1x Yamamoto modded to a twin stack with carbon cans
1x HRC system
1x beet single can system
And a gf system on the cbr
Re: What exhausts u all got?
Posted: Sun May 29, 2011 11:13 pm
by Yakama
Glad to see I'm not the only one hoarding exhaust systems
Re: What exhausts u all got?
Posted: Mon May 30, 2011 12:22 am
by BillingCBR
At one point I had a cut stock, TSR st single exit and a TSR Ti SP1 style, then sold it, plus for my CBR I had a stock one, a st Motad one, a DIC alu and a Moriwaki EMU, with (hopefully) a BEET Ti on the way from Japan :D
Re: What exhausts u all got?
Posted: Mon May 30, 2011 7:33 am
by royster81
I wolfing cal it hoarding, I've 3 vfrs,an rvf and the cbr, each bike has a system and i have 3 spare.... Ok maybe it's a little bit of hoarding....
Re: What exhausts u all got?
Posted: Tue May 31, 2011 8:08 pm
by mruehl34
JHA sp1 Full system, moriwaki and tyga System
Michael
Re: What exhausts u all got?
Posted: Tue Jan 24, 2012 11:36 am
by lizard821000
need a little help here, so from what i can gather, i cant fit a slip on can to my half yam system
but if i replace the original stock half, i can have any can!? is this right?
so i supose if thats right , what would be the better set up to have? a half yam system with its correct can.....or a stock system with a tyga carbon 450mm can??
would it be possible to keep the half yam pipes on and cut the can to take the tyga slip on?? or is that just crazy!?
cheers for any help guys as i do want the tyga carbon can but just not sure if i can get it to fit and it then having a lesser effect on performance than i already have now, if that makes sense. :)
Re: What exhausts u all got?
Posted: Tue Jan 24, 2012 11:51 am
by Drunkn Munky
Eh?????? I think I know what you mean. Most yam systems don't have a link pipe for the can, GF sells them so you can either fit a slip on or bolt on can. Have a look at my old black Rvf, that has one.
What exhausts u all got?
Posted: Tue Jan 24, 2012 12:04 pm
by hannakournikova
I have:
Ethos single carbon can 3/4 system.
Standard system de-baffled.
Swona full twin can system (pretty rare I believe).
JHA ganador full system single can.
Yamamoto 3/4 system with carbon can.
Yamamoto Spec A twin can system
Re: What exhausts u all got?
Posted: Tue Jan 24, 2012 12:05 pm
by lizard821000
im shit at explaining lol
iv got a half yam system right now, but want to fit the tyga end can. can it be done? worth doing over the yam half system etc?
or will i need to revert back to the stock pipes to fit the tyga end can, ya get me>? lol
