theyre off an aprilia rsv 2003

cheers for the help I will investigate and probably have more questions!

Sneaky google says 5/8 is std for RSV- not sure if someone has one and can confirm.

Get the right m/c though mate, it would be folly not to do this upgrade correctly

CMSMJ1 wrote:Sneaky google says 5/8 is std for RSV- not sure if someone has one and can confirm.

Get the right m/c though mate, it would be folly not to do this upgrade correctly

Would that ducati one suffice then?

cheers for the help

Not sure, but you could try and get an rsv one, you will know it's the right one then

As Jeff says - get an RSV one..you know it makes sense!

just for comparison, i use standard nc35 calipers and an R6 Nissin master cylinder. not great for the road, but great for the track - it stops you like an iron bar through the front wheel

There is an RSV one on ebay for 70 quid

http://cgi.ebay.co.uk/Aprilia-RSV-Mille ... _500wt_922

but it is 70 quid....

I asked the seller yesterday about what he had fitted with these brakes -

he said the nc30 m/c was adequate used to dive under braking a bit, he suggested upping the preload. As they work fine with the current m/c I may well wait until a cheap rsv m/c comes up. 82 quid is the cheapest I can find at the moment.

Any more advice is always welcome and appreciated.

I'm definitely not a man of my word....rsv m/c purchased today. Lovely lovely.

Advice was greatly appreciated

hahaha, get some sbs duel carbon pads and you will make your teeth fall out