CBR600RR07 forks on NC29?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
marty400
- Familiar Member
- Posts: 250
- Joined: Thu Jun 19, 2008 2:06 pm
Re: CBR600RR07 forks on NC29?
PARUS wrote:Made some photo today.
1. Top and bottom yoke fit straight. Stem length is same, bearings is the same (and interchangeable). All what need to be done is increase holders never bottom yoke. Like picture below.
I use bolt to make holder adjustable.
2. That's all.. all other fit as old forks.
I'm using also CBR600 wheel ( with brake rotors), but looks NC29 also fit with different spacers. And keep in mind that disk on CBR400 has smaller diameter 296mm against 310mm on CBR600.
I'm reading up the archives!
Wow Parus,
Flipping awesome!
Hope you are still playing around with CBR400rrs!
Any more updates on how the CBR6 2007 forks?
Does it hit the clocks etc on full lock?
Hows the turning circle?
What happens with the Electronic Steering dampener on the CBR6?
Etc
etc
Best wishes
Martin
-
marty400
- Familiar Member
- Posts: 250
- Joined: Thu Jun 19, 2008 2:06 pm
Re: CBR600RR07 forks on NC29?
Bump.
Oh man, has Parus left the building on 400s?
Shame, awesome to hear his write-ups!
Oh man, has Parus left the building on 400s?
Shame, awesome to hear his write-ups!
-
dunkenb
- Regular Member
- Posts: 560
- Joined: Wed Jun 03, 2009 9:39 pm
- Bike owned: Cbr400rr nc29 type8 NSR250
- Location: West Midlands
Re: CBR600RR07 forks on NC29?
I pm'd parus as i was interested in his project too. He said he was moving away and didnt know how to take his bike with him so he may have to leave the nc29 for a few years. 
-
marty400
- Familiar Member
- Posts: 250
- Joined: Thu Jun 19, 2008 2:06 pm
Re: CBR600RR07 forks on NC29?
That's a real shame!
His final invention should be put into a museum.
Did he ever get FI worked out for the NC29 bike?
Regards
Martin
His final invention should be put into a museum.
Did he ever get FI worked out for the NC29 bike?
Regards
Martin
-
PARUS
- Senior Member
- Posts: 1160
- Joined: Tue Apr 29, 2008 10:01 pm
- Bike owned: Already 20% of NC29...
- Location: Seattle, USA
- Contact:
Re: CBR600RR07 forks on NC29?
Yes, FI works. I have some problem with MAP sensor - look like vacuum produce by 400cc engine are very small. I was planning this summer to finish with 600rr swingarm conversion. I will come back to Ukraine at he end of July and probably finish with swingarm conversion. That all I can do. Them move to USA and I don't know when I able to get bike to USA and how much it can cost to me.marty400 wrote:That's a real shame!
His final invention should be put into a museum.
Did he ever get FI worked out for the NC29 bike?
Regards
Martin
BTW: If someone interesting in completely full wiring loom + microsquirt + jimstin + knocktek(knock sensor + controller) and probably other stuff let me know. I'm probably to sell it, because to transfer the bike to USA I need disassemble the bike.
BTW: If someone know how to transfer bike to USA. Let know. Most of people told me there is no sense.