Sigma speedo all mounted, along with the RVF wheels.


Which Sigma did you go for - are you impressed with it?

Not sure of the model without looking at it, it's the one with the wire to the speed sensor pick up (ie not wireless).
It's ok, the main reason I fitted it was to get through the MOT.
I've not had the opportunity to test its accuracy yet but the speed seems to match other vehicles through speed cameras.
It ticks those two boxes and that's all I was after really.

Glad it's accurate! Was looking at this one -

http://www.sigmasport.com/en/produkte/m ... 2/?flash=0

Has a fair amount of extras on it and seems a reasonable price...

Never really liked the high tensile cap heads for caliper bolts.
So today I changed them for some RLR titanium ones and locked wired them

Before


After

Well the bikes done 30 miles since the build so that must mean the can needs changing.
TSR goodness courtesy of Zippy, cheers bud. Bit of a clean up then it'll get bolted on.

Looking forward to seeing it on there.

What I really want to see though is the BCF thread moved onto here;-) you know what I mean :-)

Done and done.

Bit more Ti. Did the brake lever bolt too

Went to get the bike round brands for a short shake down run.
Well until the look of the noise testers face that is.

The bike coming in at 106.9db and the limit being 105db he said there was no way

Bought a baffle, had to shorten it to fit and modified it get kill a few more db's.
If it is well under the limit I'll drill some holes so it flows a bit more.

That looks like a very restrictive baffle mate, must have killed the top end?