Page 22 of 22
Re: Post race-bingle NC30 rebuild - pic thread
Posted: Sun Jun 28, 2015 1:04 pm
by SpyVFR
StrayAlien wrote:You may also recall that I had some shock/swingarm clearance issues. So, I figured I'd make an length-adjustable pull arm (dog bone) to help with ride height and clearance. I ordered the bits and here we go:
The stuff to make an adjustable pull arm between 120mm and 160mm in length .. paaahhlenty.
A quick inspection assembling of the parts reveals a very very high quality setup:
Offering them up to the installed HRC setup show they will be okay on length. I have many things to do before revisiting the shock though. Stay tuned.
I really need to buy but I do not find it ... can you help me please? thank you
Re: Post race-bingle NC30 rebuild - pic thread
Posted: Mon Jun 29, 2015 12:09 am
by StrayAlien
If is earlier in this thread on page #19.
McGill motorsport in the UK. The part numbers I used are here:
viewtopic.php?f=24&t=44795&start=180#p333218
your requirements may be different so those parts may not suit you.
All the best.
Re: Post race-bingle NC30 rebuild - pic thread
Posted: Mon Jun 29, 2015 6:16 pm
by SpyVFR
StrayAlien wrote:If is earlier in this thread on page #19.
McGill motorsport in the UK. The part numbers I used are here:
viewtopic.php?f=24&t=44795&start=180#p333218
your requirements may be different so those parts may not suit you.
All the best.
I do not find ... I think it's this or not ??
http://www.mcgillmotorsport.com/imperia ... kages-unf/
Re: Post race-bingle NC30 rebuild - pic thread
Posted: Mon Jun 29, 2015 11:50 pm
by StrayAlien
I gave the McGill part numbers page 19 on this thread. Here they are again.
2 x XMRM10 = £16.66
2 x XMLM10 = £16.66
2 x TURN-M10-70 = £8.90
2 x JNRM10 = £0.66
2 x JNLM10 = £0.66
The parts I got are metric, not UNF as you have linked to. UNF/UNC are US imperial. Your requirements may differ but the bikes are metric, not imperial.
Good luck.
Re: Post race-bingle NC30 rebuild - pic thread
Posted: Wed Nov 04, 2015 10:59 am
by SpyVFR
Dear friend, a question, I have shock Ohlins TTX '04 -'05 CBR1000RR (HO347) and I'm seriously considering putting NC30, I think it will be possible ... what do you think in your opinion please honestly?
