Page 22 of 23
Re: Banoffee's NC30
Posted: Wed Jun 20, 2012 6:44 pm
by banoffee
Thanks!
Brake fluid changed and calipers serviced today at lunchtime.
Re: Banoffee's NC30
Posted: Mon Apr 08, 2013 7:46 pm
by banoffee
Been too long since this got any attention. Now has fresh BT090s, serviced, cleaned, started, grin.
One bike down, two to go. Hello spring, I've missed you.
Re: Banoffee's NC30
Posted: Sun Apr 14, 2013 5:04 pm
by banoffee
Spent the afternoon riding around Surrey, West Sussex and Hampshire. The latter being where it pissed it down. Oh well time for another wash :) Bike is running a treat though, especially after fresh fuel.
Re: Banoffee's NC30
Posted: Mon Jul 29, 2013 8:04 pm
by banoffee
This has been in my storage garage for a while now as have been enjoying my other bikes. Time for a few small jobs including a front brake master cylinder rebuild.
Re: Banoffee's NC30
Posted: Wed Jul 31, 2013 6:48 pm
by banoffee
Fresh MOT certificate
Re: Banoffee's NC30
Posted: Wed Aug 14, 2013 9:14 pm
by banoffee
Productive evening in the workshop: the NC30 now has a freshly rebuilt Fireblade 5/8" master cylinder.
Re: Banoffee's NC30
Posted: Wed Aug 14, 2013 11:01 pm
by benny
banoffee wrote:Productive evening in the workshop: the NC30 now has a freshly rebuilt Fireblade 5/8" master cylinder.
Have you changed the calipers as well?
Isn't the stock 14mm bore?
Re: Banoffee's NC30
Posted: Sat Nov 16, 2013 8:57 pm
by banoffee
NC30 was up on the bench today for some winter lovin'. Checked over. Chain cleaned, adjusted and lubed. Lower radiator removed, cleaned and repainted. Coolant changed. Under fairing clean. ACF50 applied.
Re: Banoffee's NC30
Posted: Sat Nov 30, 2013 5:21 pm
by banoffee
Re: Banoffee's NC30
Posted: Mon Dec 02, 2013 7:14 pm
by banoffee
Seaside again today :-)
