Re: BREAKING NEAR COMPLETE 3TJ fzr400rr loads of parts avilable
Posted: Sun Jan 18, 2009 11:43 pm
Still have a load of bits left anything wanted just ask i may have it.
Do you have a pair of front calipers for sale?
Cheers
http://www.400greybike.com/forum/
BREAKING NEAR COMPLETE 3TJ fzr400rr loads of parts avilable
Page 3 of 4
Re: BREAKING NEAR COMPLETE 3TJ fzr400rr loads of parts avilable
Posted: Mon Jan 19, 2009 7:59 pm
Re: BREAKING NEAR COMPLETE 3TJ fzr400rr loads of parts avilable
Posted: Mon Jan 19, 2009 10:57 pm
Buy it new and garenteed to fitclarkee wrote:Hi, do you have the Y shaped mirror brace bit that goes from the top of the frame?
Re: BREAKING NEAR COMPLETE 3TJ fzr400rr loads of parts avilable
Posted: Tue Jan 20, 2009 10:12 pm
sorry mate calipers gone.400 3en1 wrote:Do you have a pair of front calipers for sale?
Cheers
Re: BREAKING NEAR COMPLETE 3TJ fzr400rr loads of parts avilable
Posted: Tue Jan 20, 2009 10:22 pm
have you got rear spindle and all the gubbins ie alloy blocks and spacers cheers..
Re: BREAKING NEAR COMPLETE 3TJ fzr400rr loads of parts avilable
Posted: Tue Jan 20, 2009 10:36 pm
have you got a fuel pump?
cheers
cheers
Re: BREAKING NEAR COMPLETE 3TJ fzr400rr loads of parts avilable
Posted: Tue Jan 20, 2009 10:51 pm
If you have a 3EN1 I don't think 3TJ calipers will fit. Measure the spacing of the bolts holding the cailpers onto the forks, if they're 100mm C/C's then the later Yamaha Blue Spots will probably fit. They're standard on most modern Yamaha's.400 3en1 wrote:Do you have a pair of front calipers for sale?
Cheers
A lot of Yamaha stuff can swap between models the FZR400's closest model is the FZR600
Re: BREAKING NEAR COMPLETE 3TJ fzr400rr loads of parts avilable
Posted: Tue Jan 20, 2009 10:51 pm
Guess what Taggy....
Alex.
Alex.
Re: BREAKING NEAR COMPLETE 3TJ fzr400rr loads of parts avilable
Posted: Thu Jan 22, 2009 12:03 pm
Taggy wrote:have you got a fuel pump?
cheers
yes have a fuel pump PM if you need it.
Re: BREAKING NEAR COMPLETE 3TJ fzr400rr loads of parts avilable
Posted: Thu Jan 22, 2009 12:03 pm
yes would have a spindle complete if you still need fell free 2 PM me and make me an offer.lajracing wrote:have you got rear spindle and all the gubbins ie alloy blocks and spacers cheers..