Awesome,

We just need a load of stickies with nothing but tech specs and useful factoids in them I thinks ^_^

My contribution to the tech talk is writing up the NC24 general specs as most websites have the specs of the NC30 listed as NC24 or they are just plain wrong.

NC24 Specs

CMSMJ1 wrote:Bring it on gents
Saying that, would be looking to take a set of 30 carbs and 35 carbs to Simon-ed's dyno day and see what the crack is back to back...

I'd be interested in seeing that, presuming both were jetted properly for the setup.

It would be guessed for the mains to be fair buddy - I have 130 jets in myRVF carbs so no idea what the VFR carbs would want for the same setup.

One thing they will have is the bakudan kit in them so might be horrific or might be good...we shall see!!

just need someone to flog me a stack or SP1 setup asap....

I haven't forgotten - just a tad busy at the moment (and I seem to have loaned my micrometer to someone). I'll get the ball rolling in the next few days.

NC24 needles are not the same as NC30 HRC needles - I'll post the evidence very soon. I might be able to get a bit done at work before the weekend, we'll see.

Oh, and I'll be in the workshop on the weekend, so I'll HRC the NC21 carb bracket and post some pics.

ref the emulsion tubes.. Know anything about these my antipodean friends? How do they differ? Do we have alt options like the oft mentioned nc24 slides etc etc?

NC30
16165-MR8-640 (cyl 1 and 3) - 16165-MR8-600 (cyl 2 and 4)

NC30 HRC
16165-NKA-000 - (noted in Japanese with a 4 and a 12 - Holes in the tube?)
16166-NKA-000 - (noted in Japanese with a 5 and a 14 - Holes in the tube?)

NC35
16166-MR8-900 (cyl 1 and 3) - 16165-MR8-900 (cyl 2 and 4)

NC35 HRC
16165-NKA-900

CMSMJ1 wrote: Do we have alt options like the oft mentioned nc24 slides etc

i got a set of '24 slides now matey and they are fitted to the bike but unfortuatly the bike has one or two things missing before i can get it to a dyno to see if they help or hinder .

royster81 wrote:

CMSMJ1 wrote: Do we have alt options like the oft mentioned nc24 slides etc

i got a set of '24 slides now matey and they are fitted to the bike but unfortuatly the bike has one or two things missing before i can get it to a dyno to see if they help or hinder .

Stuff missing? NO way

Am off to the nudge wink nod nod in an hour or two...and then ot the post office wicked

so, can we see if the NC24 slides do actually work?

Cam - did you sort yours out?

CMSMJ1 wrote:

royster81 wrote:

CMSMJ1 wrote:

Stuff missing? NO way
Am off to the nudge wink nod nod in an hour or two...and then ot the post office wicked
so, can we see if the NC24 slides do actually work?

fried fish fried fish !! (cough..cough)
look forward to hearing your report Rock leader,the satilite phone is by one's side if you need to update on the mission,is there to be one single shipment or one to follow over .....

...and if this works out to be a success you might have something else sent to you for further "testing"....

takcarsteadi out ....

royster81 wrote:fried fish fried fish !! (cough..cough)
look forward to hearing your report Rock leader,the satilite phone is by one's side if you need to update on the mission,is there to be one single shipment or one to follow over .....

...and if this works out to be a success you might have something else sent to you for further "testing"....

takcarsteadi out ....

Oh man, not the crocodiles again LOL

viper_biker wrote:

royster81 wrote:fried fish fried fish !! (cough..cough)
look forward to hearing your report Rock leader,the satilite phone is by one's side if you need to update on the mission,is there to be one single shipment or one to follow over .....
...and if this works out to be a success you might have something else sent to you for further "testing"....
takcarsteadi out ....

Oh man, not the crocodiles again LOL

yes the lizard catchers are at large again...