Page 3 of 4
Re: air box rubbers
Posted: Thu Aug 23, 2012 11:52 am
by rockTJ
Mine arrived today. Will try and fit them to the TJ over this coming bank holiday weekend. Let you know how I get on
Chris
Edit: I couldn't wait! They fit airbox and carbs BUT they hold the airbox about 8mm higher up at the back end than the std 3TJ rubbers. I will offer up the tank over the weekend and see what gives......
Re: air box rubbers
Posted: Mon May 12, 2014 12:43 pm
by Maelstrom
Coming soon! Note that my 'soon' is usually 8-10 weeks
Re: air box rubbers
Posted: Mon May 12, 2014 12:51 pm
by Drunkn Munky
LiteTekBlair wrote:Coming soon! Note that my 'soon' is usually 8-10 weeks
Put me down for a set
Re: air box rubbers
Posted: Mon May 12, 2014 1:26 pm
by Maelstrom
These are the curved ones for the 3TJ1 & 3TJ2. Still Ok?
Re: air box rubbers
Posted: Mon May 12, 2014 3:16 pm
by Drunkn Munky
Yep for cv's. Doubtfull but if you decide to make the short fcr versions put me down for a set of those too
Re: air box rubbers
Posted: Wed May 14, 2014 2:14 pm
by boywonder
For me the same.
For CV's and and if you decide to make them for the FCR.
Let me know how much they are.
Re: air box rubbers
Posted: Thu May 15, 2014 12:45 am
by Maelstrom
All noted.
I am going to make them from Viton so they are not going to be cheap. Sorry about that. Will post more details as they become available.
cheers
Blair
Re: air box rubbers
Posted: Thu May 15, 2014 11:55 am
by boywonder
Hi Blair,
So you found some new carb rubbers to copy?
Michael
Re: air box rubbers
Posted: Thu May 15, 2014 1:06 pm
by Maelstrom
No, not a new one a pristine second hand one. It is one of mine. Very odd because the others are are hard and not good enough for a sample.
cheers
Re: air box rubbers
Posted: Thu May 15, 2014 8:51 pm
by boywonder
Aha I see.
Good enough for me
