New Yokes from G-Force
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 150
- Joined: Wed Apr 30, 2008 8:11 pm
- Location: Cumming, GA USA
- Contact:
Re: New Yokes from G-Force
Good deal......bring some skills though. Your gonna need em.
http://www.wera.com/points/showpoints.a ... &rg=3&c=16
http://www.wera.com/points/showpoints.a ... &rg=3&c=20
http://www.wera.com/points/showpoints.a ... &rg=8&c=20
:)
http://www.wera.com/points/showpoints.a ... &rg=3&c=16
http://www.wera.com/points/showpoints.a ... &rg=3&c=20
http://www.wera.com/points/showpoints.a ... &rg=8&c=20
:)
- RVFHooligan
- Familiar Member
- Posts: 344
- Joined: Tue May 27, 2008 1:40 am
- Location: Tampa, FL, USA
Re: New Yokes from G-Force
I am assuming you are Kenny Duval?
If so, great job!! Tell me when you are racing at Jennings next or if you are doing any ROC races at Daytona in October. I'll gladly be a pit bitch for ya.
My friend just left my house, he dropped off a '07 R6 rear shock for me to play with on the RVF. His name is Greg Melka, aka Melkman. Heard of him? He races CCS. Was the #2 CCS Florida Expert rider last year, #4 Expert the year before, #5 Expert the year before, and #1 Amateur plate the year before that. He raced CCS Southeast this year and is in contention for the #1 Expert plate. Last race is at VIR in 2 weeks. He's older, gonna be 40 soon, and has only been doing trackdays and racing for about 5-6 years. I keep telling him if he only started sooner! You might know him from the Jennings website.

My friend just left my house, he dropped off a '07 R6 rear shock for me to play with on the RVF. His name is Greg Melka, aka Melkman. Heard of him? He races CCS. Was the #2 CCS Florida Expert rider last year, #4 Expert the year before, #5 Expert the year before, and #1 Amateur plate the year before that. He raced CCS Southeast this year and is in contention for the #1 Expert plate. Last race is at VIR in 2 weeks. He's older, gonna be 40 soon, and has only been doing trackdays and racing for about 5-6 years. I keep telling him if he only started sooner! You might know him from the Jennings website.
My Sponsor? MasterCard, I only wish it was priceless!
-
- Settled in member
- Posts: 150
- Joined: Wed Apr 30, 2008 8:11 pm
- Location: Cumming, GA USA
- Contact:
Re: New Yokes from G-Force
I know of Greg and have chatted with him on the WERA BBS in the past. Nice guy, damn fast as well.
I only run the WERA stuff your are certainly welcome to come hang out and if the fancy strikes you take a school, get a license and go racin with us. We have a lot of fun on the little 400's.
I only run the WERA stuff your are certainly welcome to come hang out and if the fancy strikes you take a school, get a license and go racin with us. We have a lot of fun on the little 400's.
- RVFHooligan
- Familiar Member
- Posts: 344
- Joined: Tue May 27, 2008 1:40 am
- Location: Tampa, FL, USA
Re: New Yokes from G-Force
Jeeez, I wish I could turn back the hands of time. No racing for me. 42 yrs. old now, not getting any younger. I've completed the Hammer race school before. Just been doing trackdays for about 15 years. Probably 30+ trackdays at Jennings, Daytona, Sebring, Roebling. My bucket list includes Barber, Homestead, and the new and improved Moroso. Maybe VIR someday, and if I ever get back up North the New Jersey Motorsports Park, once the grass grows in. Look forward to meeting and riding with you one day. Greg raced my 636 a few years back at Daytona when he was just starting out, hence the yellow plates and high number....see below
SORRY ABOUT THE THREAD JACK!!!!
SORRY ABOUT THE THREAD JACK!!!!
You do not have the required permissions to view the files attached to this post.
My Sponsor? MasterCard, I only wish it was priceless!
-
- Settled in member
- Posts: 150
- Joined: Wed Apr 30, 2008 8:11 pm
- Location: Cumming, GA USA
- Contact:
Re: New Yokes from G-Force
You'll be fine we still have plenty of 50+ year old guys racing. Hell I am 35.
-
- Settled in member
- Posts: 53
- Joined: Thu May 01, 2008 6:13 am
- Location: Perth, Aust.
Re: New Yokes from G-Force
Just twigged to what those extra knobby bits on the bottom yoke are...
eccentric adjustable steering stops, very nice!
eccentric adjustable steering stops, very nice!
-
- Familiar Member
- Posts: 288
- Joined: Thu May 29, 2008 5:58 am
- Bike owned: VTR-250, VFR400RR,
- Location: Santa Clara County, California, USA
- Contact:
Re: New Yokes from G-Force
As much as I would like to take credit for those, and the top nut, those were purchased straight from Attack Performance http://www.attackperformance.com/TripleClamps.htmlMockery wrote:Just twigged to what those extra knobby bits on the bottom yoke are...
eccentric adjustable steering stops, very nice!
Why not? They were already made and cheaper than what I could get them done for.
-
- Settled in member
- Posts: 150
- Joined: Wed Apr 30, 2008 8:11 pm
- Location: Cumming, GA USA
- Contact:
Re: New Yokes from G-Force
Ok.....these things are just damn sexy. They will be on the bike before the clock strikes midnight.
-
- Settled in member
- Posts: 150
- Joined: Wed Apr 30, 2008 8:11 pm
- Location: Cumming, GA USA
- Contact:
Re: New Yokes from G-Force
They are on the bike. Fit perfectly. However some jackass forgot that he used all the 600RR spacers locknuts and such on his front end. He sold the top locknuts and such to someone with the stock front end. Guess I'll be making a parts order.
-
- Familiar Member
- Posts: 288
- Joined: Thu May 29, 2008 5:58 am
- Bike owned: VTR-250, VFR400RR,
- Location: Santa Clara County, California, USA
- Contact:
Re: New Yokes from G-Force
I guess that's what I get when I try to make things simple...It gets complicated. If I had something sitting around I would send it. Sorry Kenny.venom51 wrote:They are on the bike. Fit perfectly. However some jackass forgot that he used all the 600RR spacers locknuts and such on his front end. He sold the top locknuts and such to someone with the stock front end. Guess I'll be making a parts order.
Mike Norman