Re: GK76A Track bike...
Posted: Mon Apr 18, 2011 11:22 pm
Coming along nicely.
http://www.400greybike.com/forum/
GK76A Track bike...
Page 3 of 4
Re: GK76A Track bike...
Posted: Tue Apr 19, 2011 10:47 am
Just playing the waiting game, really cant wait to get the bike back together lol.
Re: GK76A Track bike...
Posted: Fri Apr 22, 2011 2:59 pm
Updates:
Brother came home from work and said Bret's started working on my engine and i need a part. So i popped down and he showed me one of my oil feed pipes, its got a slight bend in it so i need another, also i need a base gasket (goes under the barrels). Other than that, he said the engine is healthy.
So back to hunting down part numbers.....
P.S anyone know the part numbers?
Brother came home from work and said Bret's started working on my engine and i need a part. So i popped down and he showed me one of my oil feed pipes, its got a slight bend in it so i need another, also i need a base gasket (goes under the barrels). Other than that, he said the engine is healthy.
So back to hunting down part numbers.....
P.S anyone know the part numbers?
Re: GK76A Track bike...
Posted: Fri Apr 22, 2011 8:30 pm
call michelle at robinsons foundry. she has the parts books for the 76a so you don't need part numbers
Re: GK76A Track bike...
Posted: Tue May 03, 2011 5:44 pm
Parts came today, i dropped them off earlier.
Just gotta wait to get the engine back....
Just gotta wait to get the engine back....
Re: GK76A Track bike...
Posted: Thu Jun 23, 2011 7:53 pm
My uncle dropped my engine back this morning, i managed to fit it back in. I just need to connect it all back up, new oil and filter and water.
The only pics i can get are of the inlets:
Its been skimmed, ported ect. The work inside the head is mental, shame i couldnt get pics. Ive gotta go down and see Brett today, also hand over 250 notes for the work...
Next updates will be when its all together......
The only pics i can get are of the inlets:
Its been skimmed, ported ect. The work inside the head is mental, shame i couldnt get pics. Ive gotta go down and see Brett today, also hand over 250 notes for the work...
Next updates will be when its all together......
Re: GK76A Track bike...
Posted: Fri Jun 24, 2011 1:33 pm
Mate, if i want to use k&n filter, i'll just use the smaller velocity ring? then i dont have to retune my g4, right? thanks.morris147 wrote:I have no road bike for the moment so i thought id get a little bit of work done to my track bike.
It does have a seat unit but it wasn't fitted in the pic, and thats the tank off my old road bike. I have a red and black one with a stomp grip.
When i sold my road bike i removed the Coerce rear set's and K&N filter and put them on the track bike.
The k&n came with 2 velocity rings. The smallest hole is the standard air box size, and the bigger one is for when you "tune" the bike.
Rear set's:
HRC rear brake reservoir to fit:
I also have a few bits kicking around that i forgot to take pictures of, ill make sure i get them next time.
I have ordered a set of headers and gaskets, I also need to take the head off and drop it off at Bret Sims Motorsport.
Re: GK76A Track bike...
Posted: Fri Jun 24, 2011 5:57 pm
will still need a small amount of setting up with the small ring but not as bad as the large ring
GK76A Track bike...
Posted: Tue Jul 26, 2011 2:24 pm
Any update on this?
Re: GK76A Track bike...
Posted: Sun Jul 31, 2011 7:52 pm
I have one i use for track days if anyone would like to look.
add me on facebook Jonhunt85 (jon-athan r hunt) (jonhunt85@hotmail.com)
add me on facebook Jonhunt85 (jon-athan r hunt) (jonhunt85@hotmail.com)