Page 3 of 23
Re: Project has started - my NC30
Posted: Wed Aug 26, 2009 3:03 pm
by banoffee
cheers. the can put it over budget but hey, it had to be done

Re: Project has started - my NC30
Posted: Wed Aug 26, 2009 3:27 pm
by banoffee
almost forgot...

Re: Project has started - my NC30
Posted: Wed Aug 26, 2009 8:07 pm
by ibby4585
hello mate i want my paintwork as clean as yours, you say you used rubbing compound? what actually is it and where can i get it from? Excellent bike, very clean!!
Re: Project has started - my NC30
Posted: Wed Aug 26, 2009 8:21 pm
by banoffee
Re: Project has started - my NC30
Posted: Wed Aug 26, 2009 9:21 pm
by alexwitham
im interested to see how you get on with that gold tape u ordered too...
Re: Project has started - my NC30
Posted: Wed Aug 26, 2009 11:30 pm
by banoffee
the original looks like 'champagne gold' rather than simple gold, i.e. more of a silvery gold colour. so have measured up and ordered some from US ebay. not a huge cost so worth a go, don't want to spend a fortune on cosmetics for what is essentially a budget bike
Re: Project has started - my NC30
Posted: Wed Aug 26, 2009 11:38 pm
by alexwitham
post us up a pic when u've got it fitted to the fairing. i need a small amount =)
Re: Project has started - my NC30
Posted: Wed Aug 26, 2009 11:59 pm
by banoffee
I'll probably have some spare, doubt I'll be needing 50ft of it

Re: Project has started - my NC30
Posted: Thu Aug 27, 2009 3:54 pm
by alexwitham
50ft...lol.
if it comes up nice i'll take a few ft of it off your hands

Re: Project has started - my NC30
Posted: Mon Aug 31, 2009 11:47 am
by banoffee
Well, have fitted the can, rejetted the carbs and taken it for a few rides. have to say that the +2R sprocket, can and jetting have made a huge difference (as did taking the carbs off to clean them properly)
Unfortunately I found a thin film of oil inside the bellypan so have had a look. The bloody alternator cover is cracked so a replacement one is on the cards as well as another gasket. Fingers crossed it will be OK then!