Page 20 of 27
Re: Porndoguk - VFR400 R3K NC30
Posted: Mon Jan 09, 2012 12:11 pm
by porndoguk
Neosophist wrote:Thats odd.. the two holes are smaller than the 2.5 hole and is the same as the genuine HRC slider setup.
Only speculation but perhaps his problems were something else that got fixed at the same time as removing and re-installing the slides.
59? Aim in the 60's :D
The UK one made 64ps I believe and that was only increased jetting and freer-flowing exhaust (not sure about ECU so don't know)
However, since you have a Yamamoto system / tyga can? (guess)
Hopefully you'll get a good figure.
Kev's bike and a few members on here at the dyno day with good condition NC's and half/full systems were seeing around 62-63hp so I think thats a resonable target for a stock-motor thats running well. :-)
I Have a FULL tyga system now with a longer 450mm can in carbon to hopefully reduce a little of the sound, would be nice to get dynoed at kevs again so i got a base to work from rather than anywhere local here.
i dont want to quote BHP i would hope fore more to what i expect of ATLEAST 59..........
i think ill take a ride up in a few weeks time to see maybe.
Re: Porndoguk - VFR400 R3K NC30
Posted: Mon Jan 09, 2012 1:57 pm
by lizard821000
get some pics up mate, is that the gp style one with the spring attachments. thats the one i want but bits need welding :$ cutting etc lets have a looky.
Re: Porndoguk - VFR400 R3K NC30
Posted: Mon Jan 09, 2012 4:46 pm
by porndoguk
lizard821000 wrote:get some pics up mate, is that the gp style one with the spring attachments. thats the one i want but bits need welding :$ cutting etc lets have a looky.
ive actually suprised myself i have completely forgotten to take pics, i thought that i had, but this appears one project that had avoided the radar, never fear ill get pics SOON!
Rick
Re: Porndoguk - VFR400 R3K NC30
Posted: Sat Jan 14, 2012 12:25 pm
by lizard821000
your still failing ricky
and what was you doing on celebrity wedding planner last night??
Re: Porndoguk - VFR400 R3K NC30
Posted: Sat Jan 21, 2012 12:35 pm
by lizard821000
Re: Porndoguk - VFR400 R3K NC30
Posted: Sun Jan 22, 2012 10:52 am
by porndoguk
More to the point WTF were you watching that, wearing my wifes knickers seems less of a embarrassment, ill tryvget some pics this week want to get my carbs back together and start her....
Re: Porndoguk - VFR400 R3K NC30
Posted: Sun Jan 22, 2012 2:51 pm
by lizard821000
lol, send us a pair lad and ill message you some pics.
the mrs was watching it, swear
Re: Porndoguk - VFR400 R3K NC30
Posted: Mon Jan 23, 2012 10:13 am
by porndoguk
Re: Porndoguk - VFR400 R3K NC30
Posted: Mon Jan 23, 2012 4:03 pm
by lizard821000
OM NOM NOM
me likey, that looks really long mate, its oval one yeah? im gunna have to give gav a ring and order mine up i recon.
i might get the round though.
Re: Porndoguk - VFR400 R3K NC30
Posted: Mon Jan 23, 2012 6:22 pm
by spud
[quote="lizard821000"]OM NOM NOM
me likey, that looks really long mate, its oval one yeah? im gunna have to give gav a ring and order mine up i recon.
i might get the round though.[/quote]
hi chap
sorry to hijack but are you after the full tyga systerm with can or just the can its self as ive got a tyga 450mm round can seen about 3 months use and a cut systerm and link pipe to go with it , all in good condition about to go on ebay, just a thought
sam
