Gave the fairings/wheels a good clean and cut/polish, came up very well .
fresh tank of 98 fuel, gear oil and checked chain over.

going for a blat now.

Took a few pieces of fairing off for the first time today, got all my bits ready to do the light relay mod. SO its all set as soon as I get some time to do it :)

AND... Does anyone know where I can get a set of bolts for the fairing? such as the underside ones as these are rusted and are being a pain to get off and wold like to replace them when I finally manage haha

Taxed it so I can now use it! :)

Cool thread.

I whipped the forks off to replace a leaky oil seal. Thought about painting them the correct silver colour, but will save that for another day as I need to keep riding.

Just this...

venom51 wrote:Just this...

specs from stock ? have you cut them yet ? enquiring minds.....

Personal use. Since I have no reference point from stock I can't say. These are going to be a little longer and a little lower that the Tyga units that I have on the bike now. I'll have to make new spacers to move them out away form the chassis a little to create some clearance at the at the swing arm. Tyga units are pretty close to it as they sit on the bike now.

This is a learning exercise for me.

After finishing the engine detail late last night, I have just returned from a nice wee little 60 k ride to help a mate remove the rear off his blackbird ( what a job ).


be well and ride better



veefa

Arranged to buy it! Going to collect on Monday :)

It is done