Gallery
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
- Smev
- Site Supporter
- Posts: 858
- Joined: Tue Apr 29, 2008 8:54 pm
- Bike owned: NC30 of course
- Location: The Mighty Cornwall :-)
Re: Gallery
just popping this one on as poeple have been asking about it lately :D
as it appeared in Steetfighters Extreme edition 2004!




as it appeared in Steetfighters Extreme edition 2004!




Mister Donut Rep NC30
-
- Settled in member
- Posts: 148
- Joined: Thu May 29, 2008 6:11 pm
- Location: The Peoples Republic of Bloxham, Oxfordshire.
Re: Gallery
Wow! I can see at a glance the work that's gone into that, and a rich deep red too. Lovely work Smev. 

-
- Site Supporter
- Posts: 1670
- Joined: Tue Apr 29, 2008 8:56 pm
- Bike owned: NC30 Road, SV650 Race
- Location: Hampshire, Wichester
Re: Gallery
awesome cheers for posting them, what forks are those? and is that a mito tail with a duc rear wheel?
- Smev
- Site Supporter
- Posts: 858
- Joined: Tue Apr 29, 2008 8:54 pm
- Bike owned: NC30 of course
- Location: The Mighty Cornwall :-)
Re: Gallery
Its a set of ZXR400 usd forks and yokes fitted with a VFR steering stem.
The seat unit is a genuine 996 one with side panels made from a cut down nc30 seat unit.
The rear wheel is from a 748 i believe, with a 160 section tyre fitted. A special spacer was made to off set the wheel by 4.5mm to the right so there was enough room to clear the swingarm, chain, and rear disc bolts.
I had an exhaust system made by a local engineering firm and i made the end cans with my dad in our shed!
the front fairing was an NC30 race one which we fitted Mito lights in and fibreglassed into place.
My mate Billy spayed it in Ferrari Red and the stickers came from Morgan designs :D
The seat unit is a genuine 996 one with side panels made from a cut down nc30 seat unit.
The rear wheel is from a 748 i believe, with a 160 section tyre fitted. A special spacer was made to off set the wheel by 4.5mm to the right so there was enough room to clear the swingarm, chain, and rear disc bolts.
I had an exhaust system made by a local engineering firm and i made the end cans with my dad in our shed!
the front fairing was an NC30 race one which we fitted Mito lights in and fibreglassed into place.
My mate Billy spayed it in Ferrari Red and the stickers came from Morgan designs :D
Mister Donut Rep NC30
-
- Settled in member
- Posts: 153
- Joined: Wed Apr 30, 2008 10:46 pm
Re: Gallery
Nice bike smev!
-
- Settled in member
- Posts: 4
- Joined: Sat Jun 07, 2008 6:06 am
- Location: Gold Coast, Australia
- Contact:
Re: Gallery

My race bike

My track bike. CBR600rr 2007

-
- Site Supporter
- Posts: 1670
- Joined: Tue Apr 29, 2008 8:56 pm
- Bike owned: NC30 Road, SV650 Race
- Location: Hampshire, Wichester
Re: Gallery
my new bike, she wont look like this for long...


now im just waiting on tyga to get their 2 seater tail sorted



now im just waiting on tyga to get their 2 seater tail sorted
-
- Settled in member
- Posts: 71
- Joined: Tue Jul 15, 2008 4:15 pm
- Location: Orebro Sweden
- Contact:
Re: Some changes in meantime...
micpec wrote:Made some changes to my NC35...
Old setup with TSR's
To new setup with Superpole Tit's (and the Silhouette rear seat cowl)
Were did u bought that exaust system:?:
anyone knows

and how is the sound?
do u have that system on atm?
and do u need to do any modifications in order to get it to fit?
cheers..
-
- Thieving Pikey Twat
- Posts: 140
- Joined: Thu Jun 12, 2008 12:42 pm
- Location: Groningen, the Netherlands
- Contact:
Re: Gallery
Superpole is a dutch exaust manufacturing company. I have a superpole on my FZR, and they have an awesome sound.
http://www.superpole.nl
http://www.superpole.nl
- micpec
- Site Supporter
- Posts: 1298
- Joined: Sat May 03, 2008 9:11 pm
- Bike owned: NC35’s, NC30 sold, MC34 many
- Location: The Netherlands
Re: Some changes in meantime...
Well, i've done a longggg search to get this system...Honda_NC35 wrote:
Were did u bought that exaust system:?:
anyone knows
and how is the sound?
do u have that system on atm?
and do u need to do any modifications in order to get it to fit?
cheers..


It's on atm. The sounds with the TSR carbon end cans are super loud imo!! (You can ask 2 other members on this forum who have similar exhaust system). I've changed it into new custom made titanium cans of Superpole (indeed a dutch exhaust manufacturer not far from me) with legal approval (db killers fitted makes approx. 92Db level). But without db killers.....ghgheh...

If I manage to get a soundclip I'll post it here.
"Action without Philosophy is a lethal weapon; Philosophy without action is worthless"