I can't wait to see that Rick.
Cheers.

Rob.

its been a while since ive updated this nothing major to report just a little addition here and there so ill add a few more pics

Not very clear pic but ive used some black gloss humbrol paint on the HRC logo of my yoke cap


swaped the switch over for a newer fresher one with no fading and all writting there, also white gloss humbrol on the horn switch


hand made mirror blanks, ltd edition of only 2 ever made and kindly donated to my man alexwitham



added a white led and chrome holder to the bottom of my number plate for my alarm i never fitted before hadn but wanted it to look decent so fitted here


Titanium wheel nut thanks to Ibby/Kris


A REAL P0CKET R0CKET




New Tyga Rear Sets, but i didnt like the toe and foot pegs so wasted more more on nice SES ones


SES Toe & Foot Pegs on Tyga Rear Set, Also Added a Showa Sticker to start the SECRET suzuka Replica :)


The Cheap Shot, i know i know but it does make it look a little better at least


Infills, Stainless Steel Jubilee Clips are here, a few stickers and stuff, i will pop out tonight to do some more work got some stainless steel braided brake resovoir hoses thanks to VFRderek, also need to get the carbs off to replace the Pilot Jets thanks to Sam Billing,

a few other bits from Geoff33, ive sorted out my melted alternator to loom plugs that he sent, and kindly sent me a newish Reg/Rec plug to swap. and of course a very clean set of heads which im currently working on.

if theres anyother names ive forgot to add in the update i do apolise, ill do a full thank you list when this is nearly Complete,

ps next update when more parts come and are fitted. marcus is sending me a few bits :)

Looking very clean Rick

Looking nice Rick.
I see you have a km to mph converter I got onr today are they ok?
Cheers Rob.

rob b wrote:Looking nice Rick.
I see you have a km to mph converter I got onr today are they ok?
Cheers Rob.

there fine, it will be for sale once i get the MPH Dials ordered only 5 left to go,

more pics to come in a sec been busy this evening,

Thanks Rob & Del

This Evenings Efforts

Dodgy Reg/Rec Plug



New Plug



New Infills Thanks to T Jenkos



Random Shot? cant remember why i took it?


Better pic of HRC in Black & ON on the ignition in RED


Stainless Steel Banjo Bolts Fitted (At last!)


Stainless Braided Hose Fitted - Thanks To VFRDerek Cheers Del





Rear

the bikes looking tidy pal, she ll be show room by the time your done, good work

Looking greaaaaaaaaaat!

vfrderek wrote: Looking greaaaaaaaaaat!

This evenings efforts have been fibre glassing the inside of the carbon seat pod,

i put way to much hardner in, the think catylised half way through and had to make some more resin!

the seats been sat on the heat matt all evening, and ive just been out and siliconed the carbon to the seat base, its back on the heat matt over night, tomorrow i will fill with expanding foam, and then tomorrow evening i shall rub down and start lacquering,

im just gonna use a rattle can laquer seeing as it so small what laquer did you use del? ill add a few picks in a sec

Promatic from Jawal dude.