Four+ years later, might be some demand for these again?

Ciao,

I would be interested in a 46mm hub nut if these were to be made again - are they stakeable/reusable?

Cheers

I've since discovered that there is a Triumph rear axle nut available from many places, including this one in titanium on UK eBay: 221550013684 (£33) It is re-usable, but I guess that means the axle needs to have holes drilled (and it is one hard M-F...) for the clip.

And Titan Classics makes the wheel side nut in titanium: https://titanclassics.com/product/titan ... wheel-nut/ (£29) They also do the swing arm pinch bolt for £22. (also on UK eBay)

Aftermarket top yoke nuts for the NC30/RC30 are an uncommon size, but I bought one from Lightech, so they are available in alloy, anyway.

Ciao,

Cheers man, unfortunately i'm not really interested in drilling the axle and stuff..i may just stick with the oem nut unless something else pops up.