Do you have a picture of the microfiche? If I recall its not very clear on there anyway... If you have your forks apart take a picture

Neosophist wrote:Do you have a picture of the microfiche? If I recall its not very clear on there anyway... If you have your forks apart take a picture

nah havent got it, only got the one for carbs.

dont have forks apart at the moment, stuck them back together as they were until some new forkseals arrive.i think the internals are mixed up but im not sure. do you have a copy of the microfiche?

cheers for your reply

dave

yeah! I'll take a picture tomorrow when im at home. :)

nice one

cheers dave

I think this is a bit too small to see, so below you'll find a link to the full-size version :D (2mb)

Hope that helps! ^_^

http://www.jacksons-lair.co.uk/P1020714.JPG

hi,

thanks that is a great help, im missing items 5 and 6 on the antidive fork legm they are 3 washers any idea what they are in there for?

the previouse owner has made a right hash up of the bike, everything i see to take off the bike is wrong or has been put together wrong

cheers dave

I've just done my fork seals but looking at that microfish makes me worry. part no 9 looks like it go's under the seal not above it as I've just done. opps.

Just checked my forks and they are not leaking so maybe it won't matter anyways.

spooky wrote:I've just done my fork seals but looking at that microfish makes me worry. part no 9 looks like it go's under the seal not above it as I've just done. opps.

yeah part 9 the big washer goes above the top bush, i used it to help fit the top bush by but taping the washer with a punch and driving the bush hope then the seal sits ontop of it and the circlip retains the lot. i dont know how much difference it will make?? wait and see.

ive now rebuilt my forks again as thanks to the microfice i discover that the previous owner had interchanged all the parts between the forks and they were totaly messed up! sweet as a nut now! just hope the dont start leaking!!!

cheers for all you help guys

dave

No problemo. Glad I could help.

Thats the only problem with old grey imports, when people start messing with them when they dont know what there doing :)