Unfortunately, the RGV lockstops are at the back of the yoke and the 3TJ lockstops are at the front!

It needs the RGV ones ground off (done) and new ones welded on, that's the bit I'm at now. Just waiting for the opportunity for a mate to weld something in place.

Alex.

ahh, not so easy then! make sure you get some pics up when its done!

Will stick with the SP forks sound like a bit mission to fit anything else.
Need to take the forks off htis weekend and replace the oil seals.
Not done this before so maybe asking questions next week.
Thanks for the info
Will order seals from lagracing this afternoon

If you can stretch to it then get some replacement springs too.

crack the top bolts before you take them out of the yokes was some very good advice i was given by sharpey, but i'm not talking to him at the minute so i wont mention his name!

^^^^ oh bugger!

the award for top tosser goes to......... lmao

you cant nominate yourself!

Forks been stripped and rebult and feel great.
What a change just replacing oil and giving it all a good clean make.
Also have full rebound adjustment now!!
Thanks to LAJ for seals and advice.