Page 2 of 2

Re: hollow front end knock...

Posted: Thu May 22, 2008 9:16 pm
by viper_biker
God, my back will be sore on Saturday. A chain, chain tool kit, big ratchet, extender bar and yoke socket. YOU are making the tae and coffees LOL

Re: hollow front end knock...

Posted: Thu May 22, 2008 10:02 pm
by royster81
viper_biker wrote:YOU are making the tea and coffees LOL
so nothing different there then...dude i have to make tea and coffee when i go to yours*



*well if i want to enjoy a cuppa that is lol

Re: hollow front end knock...

Posted: Thu May 22, 2008 10:03 pm
by royster81
colingram wrote:Hey Royster,
There are 2 lock rings under the top yoke
foxy bingo !!!!!!!!!!!!!1

Re: hollow front end knock...

Posted: Fri May 23, 2008 5:27 am
by carlwb3
royster81 wrote:
colingram wrote:Hey Royster,
There are 2 lock rings under the top yoke
foxy bingo !!!!!!!!!!!!!1
I have the same problem but no big socket/spanner. So maybe I have 2 problems. Could someone give me a quick run down on the easiest way to do this please? I have a Haynes manual to double check... Thanks!

Re: hollow front end knock...

Posted: Sat May 24, 2008 1:12 pm
by colingram
Hey Carl,

you need a 41m socket for the stem nut on the top yoke and a torque wrench as it's tight (140nm according to Haynes manual). loosen the top yoke pinch bolts (5m allen key jobby according to my dodgy memory) then pull the top yoke off. where you took the stem nut off, you will see two lock rings secured with a locking washer. First bend the lock washer tabs so you can loosen the top lock ring. Pull her off first, then tighten the bottom lock ring using precision shifting device and a drift. Lock washer back on, then top lock ring. Tighten her up, then bend the lock washer into place again. Top yoke back on etc and voila. Bike is gonna feel like brand new again for half and hour of elbow grease.

Sorry about the over explaining, but I have a habit of doing it and can't help it :oops:

If you are in NI (Belfast) area, I have the 41m socket.........

Re: hollow front end knock...

Posted: Sat May 24, 2008 1:16 pm
by colingram
royster81 wrote:
colingram wrote:Hey Royster,
There are 2 lock rings under the top yoke
foxy bingo !!!!!!!!!!!!!1
Glad I could help. Baffled the hell out of me for ages as well

Re: hollow front end knock...

Posted: Sat May 24, 2008 7:41 pm
by royster81
colingram wrote:
royster81 wrote:
colingram wrote:Hey Royster,
There are 2 lock rings under the top yoke
foxy bingo !!!!!!!!!!!!!1
Glad I could help. Baffled the hell out of me for ages as well
sorted today,lanky called over and we took the bike apart to sort a few things and fit a chain to the track bike.