Breaking NC29-K-conversion styled!
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Site Supporter
- Posts: 138
- Joined: Fri Sep 12, 2008 8:40 pm
- Location: wigan
Re: Breaking NC29-K-conversion styled!
how much for full bike
-
- Settled in member
- Posts: 24
- Joined: Wed Apr 30, 2008 3:03 pm
Re: Breaking NC29-K-conversion styled!
hi, make me an offer...I've got someone viewing on saturday, looking for £1000+.
located in swanley, KENT.
located in swanley, KENT.
-
- Settled in member
- Posts: 24
- Joined: Wed Apr 30, 2008 3:03 pm
Re: Breaking NC29-K-conversion styled!
hi, Ive had two offers for the bike now-both fall short of what i need. So if I break whould anyone be interested in the following(just send me your sensible offers):
*Re-con rear mono(powder coated in ohlins yellow)
*Graeme France Stainless Steel downpipes(sprayed in heat proof metallic black)
*Ram air (scope/modded airbox/extended ht coils/setup carbs with dyno jets)
*Carbon heel plates
*Carbon hugger
*Front wheel w/discs
*Front wheel w/o discs
*Rear wheel w/new wavy disc
*Rear wheel w/o new wavy disc
*Stainless Steel brake lines(tasteful carbon fibre)
*K-conversion Full kit (Brackets/tailpiece/lights/cut down subframe)
*Tank
*Mirrors(I have a few of these...)
*Foot rests
*K&N air filter
*Wiring loom
*Front forks (GF built/satin black powder coated)
*Frame (with V5 powder coated in satin black)
*Swingarm (powdercoated satin black)
*Most parts avaliable.....
Ian 07703021767
*Re-con rear mono(powder coated in ohlins yellow)
*Graeme France Stainless Steel downpipes(sprayed in heat proof metallic black)
*Ram air (scope/modded airbox/extended ht coils/setup carbs with dyno jets)
*Carbon heel plates
*Carbon hugger
*Front wheel w/discs
*Front wheel w/o discs
*Rear wheel w/new wavy disc
*Rear wheel w/o new wavy disc
*Stainless Steel brake lines(tasteful carbon fibre)
*K-conversion Full kit (Brackets/tailpiece/lights/cut down subframe)
*Tank
*Mirrors(I have a few of these...)
*Foot rests
*K&N air filter
*Wiring loom
*Front forks (GF built/satin black powder coated)
*Frame (with V5 powder coated in satin black)
*Swingarm (powdercoated satin black)
*Most parts avaliable.....
Ian 07703021767
-
- Site Supporter
- Posts: 757
- Joined: Tue Apr 29, 2008 9:37 pm
- Bike owned: NC29 CBR600F
- Location: Lancashire
Re: Breaking NC29-K-conversion styled!
I know its a daft question but have you tried ebay
-
- Site Supporter
- Posts: 138
- Joined: Fri Sep 12, 2008 8:40 pm
- Location: wigan
Re: Breaking NC29-K-conversion styled!
how much for bodykit, down pipes and can
-
- Settled in member
- Posts: 16
- Joined: Wed Dec 17, 2008 5:06 pm
Re: Breaking NC29-K-conversion styled!
very intrested in tank if its in good nick.
also maybe full kit?
PM me what u want for them!
Cheers
also maybe full kit?
PM me what u want for them!
Cheers
-
- Settled in member
- Posts: 73
- Joined: Thu May 22, 2008 5:23 pm
- Location: near mansfield
Re: Breaking NC29-K-conversion styled!
look in your inbox
-
- Settled in member
- Posts: 24
- Joined: Wed Apr 30, 2008 3:03 pm
Re: Breaking NC29-K-conversion styled!
Hi, sorry for late reply-no computer/phone for the last week!
The situation is as follows the bike is all but sold MINUS the Tank/FULL fairing/seat kit. I'll throw in the modded subframe and all brackets needed to fit for £250.
The situation is as follows the bike is all but sold MINUS the Tank/FULL fairing/seat kit. I'll throw in the modded subframe and all brackets needed to fit for £250.
- jjakaalbinoboy
- Site Supporter
- Posts: 23
- Joined: Tue Jun 10, 2008 8:19 pm
- Bike owned: TZR250 & CBR400 NC29
- Location: Evesham, Worcestershire
- Contact:
Re: Breaking NC29-K-conversion styled!
Is this stuff:
Still for sale?? I'd be interested.Faster400 wrote:Hi, sorry for late reply-no computer/phone for the last week!
The situation is as follows the bike is all but sold MINUS the Tank/FULL fairing/seat kit. I'll throw in the modded subframe and all brackets needed to fit for £250.
Babyblading since 2006
Web Developer by trade jason@jajames.co.uk
Web Developer by trade jason@jajames.co.uk
-
- Settled in member
- Posts: 69
- Joined: Sat May 03, 2008 11:00 am
- Bike owned: Aprilia RS125 Tuono, NC29 race
- Location: Denmark
Re: Breaking NC29-K-conversion styled!
Hi
What's the price of the *Re-con rear mono(powder coated in ohlins yellow) (must be the shock, right)
and *Graeme France Stainless Steel downpipes(sprayed in heat proof metallic black) + can
Kind regards
What's the price of the *Re-con rear mono(powder coated in ohlins yellow) (must be the shock, right)
and *Graeme France Stainless Steel downpipes(sprayed in heat proof metallic black) + can
Kind regards