Holy thread resurrection batman!

I need to change rear disc. So hub needs to come out.

My Haynes book of lies doesn't mention a circlip. What circlip?

And confirm 46mm for hub nut? Before I go to the tool shop tomorrow...

Big nut on left is 46mm, i use an impact socket. I get the hub off by unstaking it, using a breaker bar, have the rear brake pedal held down with bottle of oil and wheel on the ground. No problems. Hub torque is i think 210 nm however - TIGHT.

I think there is a circlip but i removed my entire piece from the swingarm and cant remember it.

And yeah holy thread resurrection lul