gavins wrote:07716-0020203 is the number on mine.

Thanks mate

Malc wrote:Neo, can you post the Honda part number for the tool please? TIA

All tool numbers are also in the Service manual from the downloads section

Neosophist wrote:

Malc wrote:Neo, can you post the Honda part number for the tool please? TIA

All tool numbers are also in the Service manual from the downloads section

That's even better - thanks also.

porndoguk wrote:the head race isn't needed as I use a C spanner

You can get a castelated socket to fit the headraces mate, no idea where i got mine from but i'll measure it later if you want. Makes setting them to the correct torque easy, if you use OEM bearings that is.

Drunkn Munky wrote:

porndoguk wrote:the head race isn't needed as I use a C spanner

You can get a castelated socket to fit the headraces mate, no idea where i got mine from but i'll measure it later if you want. Makes setting them to the correct torque easy, if you use OEM bearings that is.

I do the heads by feel any way, but i will go back to oem when i next change im using those crappy tapers!

Yeah I've never got one with taper bearings, PITA to fit fit compared to OEM