Dymag wheels anyone?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: Dymag wheels anyone?
98 / 99 era I believe, I think its forsale on line so I can look for a link later if you want to drool over it :)vfrman wrote:What year blade does the swinger fit? I have the RRW...
http://page18.auctions.yahoo.co.jp/jp/auction/w74910626
It looked very similar to this NR 750 swining arm, I havent the time now but will check later
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
vfrman
- Senior Member
- Posts: 1390
- Joined: Sat Apr 05, 2008 7:54 pm
- Bike owned: NC30, 1098s
- Location: Layton, Utah, USA
Re: Dymag wheels anyone?
The front wheel won't fit. Honda really made the front end on the RRW/X special and nothing directly bolts in.juggernaut wrote:Would they fit a 30?
-
Tim400GB
- Site Supporter
- Posts: 753
- Joined: Mon Jan 04, 2010 7:24 pm
- Bike owned: 1 x NC30, 2 x NC32.5,
- Location: SE Greater London
Re: Dymag wheels anyone?
It'd fit, just takes a bit more time and money to get new spindles/spacers made.
Wonder what disks are needed? Dont blades have the same as the nc's?
Wonder what disks are needed? Dont blades have the same as the nc's?
-
L.Svedberg
- Site Supporter
- Posts: 216
- Joined: Mon Jun 09, 2008 12:06 pm
- Location: Sweden
Re: Dymag wheels anyone?
Well, I meant of course for the wheels to fit an NC. Looks to me the front would take the std NC discs at least, and the rear I'd guess is a 5.25" which would make it perfect...
-
vfrman
- Senior Member
- Posts: 1390
- Joined: Sat Apr 05, 2008 7:54 pm
- Bike owned: NC30, 1098s
- Location: Layton, Utah, USA
Re: Dymag wheels anyone?
Nope. I have tried fitting an NC30 wheel to my RRW and the discs will not bolt up.
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: Dymag wheels anyone?
Anything can be made to fit and work with a little time and the right tooling of course, what you need to work out is weather its financially worth doing.
-
Tim400GB
- Site Supporter
- Posts: 753
- Joined: Mon Jan 04, 2010 7:24 pm
- Bike owned: 1 x NC30, 2 x NC32.5,
- Location: SE Greater London
Re: Dymag wheels anyone?
Bollocks they went cheap, missed out on them because of lack of phone reception.
-
VFRkieran
- Site Supporter
- Posts: 839
- Joined: Fri May 06, 2011 8:37 pm
- Bike owned: NC30, NSR250, CBR600, TS125
- Location: Oxfordshire
Re: Dymag wheels anyone?
Cant beleve that, i was going to stick a cheeky bid in at 350 but funds dont allow it 
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: Dymag wheels anyone?
Lol £315! I'm glad im skint right now or id be pissed that I missed them.