petrolhead19 wrote:

g1b50n wrote:

petrolhead19 wrote:i thought it looks pretty good actually, i did mine with just leds, could of maybe got longer ones but from a distance they look like a full circle.
This is mine when i did them

Sweet, i like that.

Thanks bud was just a quick mod i did lol

longmoreuk wrote:Generally dont like angel eyes - but they actually look good in the pics - good for daytime running lights anyway

They are pretty good at night suprisingly they light up the road better than the standard bulbs, a few times i have been riding and its got dark and not realised i only have my side lights on cause i could see everything and were i was going lol

Thats pretty good, what wattage are the leds mate? Did you use a heat gun/hairdryer? Or did you put the headlights in the oven lol. What diameter did they come to in the end or did you not measure them lol. Thanks

not sure what wattage they are mate i got them off ebay 24led's long bendy strips for £2, took the headlight bulb out and worked them in and around lol there like a plastic rubber material so they kind of gripped the light when i pushed them in, as i said it was just a quick mod i did lol

petrolhead19 wrote:not sure what wattage they are mate i got them off ebay 24led's long bendy strips for £2, took the headlight bulb out and worked them in and around lol there like a plastic rubber material so they kind of gripped the light when i pushed them in, as i said it was just a quick mod i did lol

Cheers mate, thanks for the info appreciate it

petrolhead19 wrote:not sure what wattage they are mate i got them off ebay 24led's long bendy strips for £2, took the headlight bulb out and worked them in and around lol there like a plastic rubber material so they kind of gripped the light when i pushed them in, as i said it was just a quick mod i did lol

What way did the LED strips connect into your loom?

vic-vtrvfr wrote:

petrolhead19 wrote:not sure what wattage they are mate i got them off ebay 24led's long bendy strips for £2, took the headlight bulb out and worked them in and around lol there like a plastic rubber material so they kind of gripped the light when i pushed them in, as i said it was just a quick mod i did lol

What way did the LED strips connect into your loom?

I spliced them up into the sidelight bulbs so they came on with the side lights, but used bullet connectors so could be disconnected if needed

Ok, cheers.
Any comments about yours when you went for MOT?

vic-vtrvfr wrote:Ok, cheers.
Any comments about yours when you went for MOT?

Didnt have them plugged in for mot thats why i use bullet connectors to wire them into side lights so i could unplug them come mot time

Light unit stripped with 90mm Angel Eye glued in place.....


Light unit assembled....


Light units fitted to bike and Angel Eyes wired in......



They are really bright, i took my side light bulbs out the rubber holders and fed the two wires through and used the holder as gromit. Put to spade connectors on the wires and plugged them in.

g1b50n wrote:

Johnny Five is alive

thunderace wrote:

g1b50n wrote:

Johnny Five is alive

LoL