Page 2 of 2

Re: nc30 fueling issues

Posted: Sun Apr 08, 2012 6:08 pm
by porndoguk
FWIW i removed my rubber flap yesterday and it made my bike breath better so much so i netted 5hp with stock cdi.

Whats the state of the fuel tap and vacuum hose?

Failing that check float heights

Re: nc30 fueling issues

Posted: Sun Apr 08, 2012 6:11 pm
by Drunkn Munky
Rick did you ride the bike without the flap or just dyno it?

Re: nc30 fueling issues

Posted: Sun Apr 08, 2012 6:14 pm
by porndoguk
Drunkn Munky wrote:Rick did you ride the bike without the flap or just dyno it?
took the flap out at dyno chucked in tank bag and rode a further 150 miles without it trouble free, also playing with andy (laminator) on motorway feel bad for leaving marcus now.

Like i said to paul crm, yesterday all ncs are different some like it some done.

Re: nc30 fueling issues

Posted: Sun Apr 08, 2012 6:21 pm
by marcus57
porndoguk wrote:
Drunkn Munky wrote:Rick did you ride the bike without the flap or just dyno it?
took the flap out at dyno chucked in tank bag and rode a further 150 miles without it trouble free, also playing with andy (laminator) on motorway feel bad for leaving marcus now.

Like i said to paul crm, yesterday all ncs are different some like it some done.
Ricks certainly seemed fine as him and laminator shot off I costed onto the hard shoulder ,

Rick I don't have a clue , like I said yesterday that was the first time I'd ridden the bike once the oki is back together I will have the tank off it and have a look.

Re: nc30 fueling issues

Posted: Sun Apr 08, 2012 6:24 pm
by Drunkn Munky
Strange animals these NC's

Marcus mine does that sometimes if i have the fuel tap in the on position, its fine on reserve.