s'gunna look real nice, cant find zinc coating or anything near me its quite frustrating

Hope so

Rooted around for a chain guard but I dont have one so I decided to make one. This was the biggest bit of ally I had, so I made a template to suit.


All cut and bent to shape, just the holes to drill now.


All fitted, drilled and tapped the swingarm to mount the other side.



Just needs a lick of paint now

Also lashed up a sharkfin guard but that needs some spacers turned up to fit that

Bloody good effort on that chainguard.

Cheers Alex

Here it is painted along with the shark fin, might redo it though, the lightning holes didnt really go to plan

looking very tidy indeed do i spy a honda britain rep in the back ground aswel

Cheers
Yeah, I've a thread on it. viewtopic.php?f=62&t=29680&start=20

Got some bolts and fixings back from the zinc coaters,

Now useable yokes


Only missing a rear sprocket


The shaft has only loosely been put in as I've not finished the rear disc yet.


Put in an old shock to get it rigid



Cleaned up the forks and this is how she sits atm

Man that is looking good!

Seeing as it going to be a trackbike with a daytime MOT I made use of the spare keyless ign barrel and smashed lhs switchgear .

I will wire the ign up as a flick switch


The only wires left from the switch gear are for the horn (needed to be road legal) and clutch switch.


Organised the garage to have a spares stock check too

mmmmm do i spot some type 8 fairings.

Where do you get your zinc coating done? is it local? your only just up the road from me so be handy if it is.