Page 2 of 2
Re: sticky black stuff on spark plugs
Posted: Wed Jan 18, 2012 4:17 pm
by leerc
durham,near newcaslte (no one has ever heard of it)
Re: sticky black stuff on spark plugs
Posted: Wed Jan 18, 2012 4:20 pm
by leerc
i pretty much always leave the fuel tap on which wont be helping
Re: sticky black stuff on spark plugs
Posted: Wed Jan 18, 2012 4:22 pm
by CMSMJ1
My wife was born there...my father in law lives in Sacreston.
You are miles away..lol
Stop leaving your fuel tap on...if nothing else if someone robs the bike it is a ballache for a newby to switch it on the move!
Re: sticky black stuff on spark plugs
Posted: Wed Jan 18, 2012 4:38 pm
by Man_Named_Dave
No-one has heard of Durham despite it having a cathedral and university?!
My girlfriend was born near there.
Re: sticky black stuff on spark plugs
Posted: Wed Jan 18, 2012 5:15 pm
by 28hodge
Brad Anderson current MX1 british motocross champion is from there (Towlaw Technically).
My oil stinks of petrol, but my bike has the HRC tap mod done (Its a track only bike) and luckily for me it leaks in the off position
When cold petrol will flow past the rings only when warm will petrol not pass the rings. thats my understanding of it anyway. dont think its as drastic as you are thinking.
Good luck
Re: sticky black stuff on spark plugs
Posted: Wed Jan 18, 2012 5:56 pm
by leerc
all the boards im on everyone says where the ***** that lol must be the sort i mix with
sacriston is about 5-6 mile from me
i
Re: sticky black stuff on spark plugs
Posted: Wed Jan 18, 2012 6:02 pm
by leerc
the name rings a bell pretty sure he was the talk of the town not so long back for winning something bike related
hope its a easy/cheap fix - hopefully ill have a definate answer tomorrow
Re: sticky black stuff on spark plugs
Posted: Thu Jan 19, 2012 3:34 pm
by leerc
the lad at the garage is confident its not burning oil and the sticky stuff on my plugs is a combo of carbon build up red ex and neglect (lack of servicing)
he also said to get rid of the exhaust thats bodged on as hes confident thats my splutter problem-its a scorpion can from a cbr600 and its litterally just slotted over the bit where the 4 pipes go into 1