Re: NC30 exhaust woe
Posted: Tue Nov 01, 2011 5:11 am
sorry my bad. I saw the photo above with the aftermarket one and just assumed. Anyway, the exhaust stay is the same dimensionally as the stock one, as Gavin says. The reason it fits our higher subframe as well as the stock one is using a clever technique called 'rotate technology' 
The hanger is just rotated to a higher position on our subframe than the stock one and you can still use the same part. This applies to both the old and new subframe models.
The hanger is just rotated to a higher position on our subframe than the stock one and you can still use the same part. This applies to both the old and new subframe models.