This is how mines sat at the moment. Headstock stand was 35 quid off eBay new.

+1. pins do not fit in the tube well so i put a 21mm socket on the pin which lifts the bike up to clear the fairing.the spare pins also make good drifts, got it off ebay from germany came in 4 days .

dom-tune wrote:+1. pins do not fit in the tube well so i put a 21mm socket on the pin which lifts the bike up to clear the fairing.the spare pins also make good drifts, got it off ebay from germany came in 4 days .

I guess it was probably this one?

http://www.ebay.co.uk/itm/STFL-FRONT-HE ... 483aeabc60

May well go for it

I used a bit of old worktop chip board and a scissor jack from a Ford Fiesta put under the front down pipes, more than sturdy enough to hold the bike up :)