honda parts question (non v4)

Post by **Cru Jones** » Thu Jun 09, 2011 8:54 pm

What piece do you need from the below?

Those m/cs are always for sale on eBay, etc. with a broken reservoir area. You can buy the res and the rest of the pieces via mail orders here in the States for price.

Post by **mo haggs** » Sat Jun 11, 2011 12:55 am

Cru Jones wrote:What piece do you need from the below?

below 28 + 29 there should be a plastic connector (screwed onto the m/c) that the res hose fits onto - but it's not pictured in this diagram

Post by **mo haggs** » Sat Jun 11, 2011 12:59 am

amorti wrote:Just a thought - could it be the same connector as used in a nissin brake master?

it could be - but the "take-off" pipe might be pointing the wrong way.

the one on an nc30/35 rear brake m/c fits but points in the comlete oposet direction

Post by **mo haggs** » Sat Jun 11, 2011 1:24 am

mo haggs wrote:
amorti wrote:Just a thought - could it be the same connector as used in a nissin brake master?
it could be - but the "take-off" pipe might be pointing the wrong way.

the one on an nc30/35 rear brake m/c fits but points in the comlete oposet direction

just had a look - the brake m/c has a round "pick-up" where the clutch has ann oblong "pick-up".

Post by **Cru Jones** » Sat Jun 11, 2011 1:52 am

mo haggs wrote:
Cru Jones wrote:What piece do you need from the below?
below 28 + 29 there should be a plastic connector (screwed onto the m/c) that the res hose fits onto - but it's not pictured in this diagram

?

There's no external reservoir, so there's no need for the connector. The reservoir sits right on top of the m/c and his held onto it by #22. So, the reservoir you have, is it off a brake m/c or the clutch master? If brake, that won't work. You need the reservoir that comes on these m/cs, which happens to be a part that people always seem to mess up.

Post by **Cru Jones** » Sat Jun 11, 2011 1:54 am

Take a look at this pic and you'll understand what I'm trying to say (notice it's messed up). lol

Post by **mo haggs** » Sat Jun 11, 2011 1:56 pm

Cru Jones wrote:Take a look at this pic and you'll understand what I'm trying to say (notice it's messed up). lol

ahh - see i was under the impression the res was mounted on a bracket like the brake res.

so all i need is the actual res then

Post by **Cru Jones** » Sat Jun 11, 2011 3:28 pm

mo haggs wrote:
Cru Jones wrote:Take a look at this pic and you'll understand what I'm trying to say (notice it's messed up). lol

ahh - see i was under the impression the res was mounted on a bracket like the brake res.

so all i need is the actual res then

If you can find a used one you'll be good. Otherwise you'll end up spending the ridiculous Honda prices.

honda parts question (non v4)

Re: honda parts question (non v4)

Re: honda parts question (non v4)

Re: honda parts question (non v4)

Re: honda parts question (non v4)

Re: honda parts question (non v4)

Re: honda parts question (non v4)

Re: honda parts question (non v4)

Re: honda parts question (non v4)