do CBR900RR CBR-929 (2000-2001) and CBR900RR CBR-954 (2002-2003) have the same disc holes as the 23?

http://cgi.ebay.co.uk/Honda-brake-rotor ... 2c5c617c1e

http://cgi.ebay.co.uk/NEW-FRONT-BRAKE-D ... 1c057c0e13

these look like arashis,

thank you, added to my watch list for when needed :D

Hi there guys.

If money would be no matter and the disc of the NC23 and NC29 are the same then you could use BrakeTech rotors. You could google them, very sweet ones. The Discs are for Race use also and from really good qualitiy. Going to mount that ones on my bike to! Offical they are not available for NC29 but for NC30 and they share also the same parameters!

DK-Tandy wrote:do CBR900RR CBR-929 (2000-2001) and CBR900RR CBR-954 (2002-2003) have the same disc holes as the 23?

http://cgi.ebay.co.uk/Honda-brake-rotor ... 2c5c617c1e

Interchangeable discs are:

RS250 1990-02 (Honda)
CBR400 (NC23)
CBR400 (NC29)
RVF400(NC35)
VFR400(NC30)
CBR600 1995-98
VFR750 1994-97
CBR900 1994-97
VTR1000 FIRESTORM 1997-06

dont suppose you also know which have interchangable calipers ??

You want NC30 lowers matey and some brackets for the SP1 /600rr etc calipers.

Sliding calipers, if well maintained are good..but old skool compared to the larger nissins.

Ref discs - the old No9 wears a pair of Stealth rotors - They were £180 including some pads made of goats cheese.

I have had them for 3/4 years, solid as fuck and no wear. They just get a touch rusty if not used..

ive thought of going down the NC30 forks with SP calipers but when i spoke to ricky about it, he said its a lot of hassle as i need the fork bottoms, capliers, new brake lines which are longer, new MC.. suppose that can be something for the future

I have just fitted a set of NG Discs to my race bike, seem to work really well and have that sorta brembo look about them as well.