Psychosomatic88 wrote:Does anybody know where I can find, or have any part numbers for HRC bits to fit an RVF?

I already have the rear brake res. but would like extra bits :D

I have a hrc hat, but it don't come cheap.


If you look through the hrc rvf manual, you'll see that most stuff is available from places as either copies or genuine parts if you're willing to pay.


Back on topic: The hrc brake hose is known to leak (even to hrc?), if you don't need to see how much fluid is in there chopped down standard hose would be better.

Stickshift wrote:

Psychosomatic88 wrote:Does anybody know where I can find, or have any part numbers for HRC bits to fit an RVF?

I already have the rear brake res. but would like extra bits :D

I have a hrc hat, but it don't come cheap.


If you look through the hrc rvf manual, you'll see that most stuff is available from places as either copies or genuine parts if you're willing to pay.

Back on topic: The hrc brake hose is known to leak (even to hrc?), if you don't need to see how much fluid is in there chopped down standard hose would be better.

Thanks stickshift

Where Can I find that manual? pretty please :D

BOT: My HRC Hose gets condensation sitting in the top of the tube by the stopper, big problem over at the rgv250 forum regarding this too (they love fitting them to their strokers)

Psychosomatic88 wrote: BOT: My HRC Hose gets condensation sitting in the top of the tube by the stopper, big problem over at the rgv250 forum regarding this too (they love fitting them to their strokers)

Yeah brake fluid being hydroscopic, it will attract moisture through unsealed areas.


All the manuals (except the nc30 F3) are on Mike's site, happy reading:

http://www.akhara.com/nc30/index.html

Duh of course it will

Many thanks, it certainly will be :D