Page 2 of 8
Re: my NC30 rebuild....
Posted: Mon Feb 21, 2011 7:56 pm
by gonzothegreat
a little bit more progress.
First let me say that I have managed to remove the last part of the exhaust (the tricky part at the rear) without any bolt snapping or removing the swingarm, but the oil leak I have there is as bad as the BP oil leak...
Some pictures, valve covers off

Front

Rear

semi naked front
Unless I knocked off a shim by accident without realising, but there was a loose shim in the middle of the front head.

Re: my NC30 rebuild....
Posted: Tue Feb 22, 2011 7:37 pm
by gonzothegreat
More work done this evening,

semi naked rear

yuk
engine will be out on Friday, post office is holding a small parcel.... my castle nut

Re: my NC30 rebuild....
Posted: Fri Feb 25, 2011 1:35 pm
by gonzothegreat
Re: my NC30 rebuild....
Posted: Fri Feb 25, 2011 1:43 pm
by gonzothegreat
Re: my NC30 rebuild....
Posted: Fri Feb 25, 2011 4:06 pm
by Drunkn Munky
Your not shy are you

you do know summers coming dont you? then again the speed your cracking on with this project it'll be finished next week!
Re: my NC30 rebuild....
Posted: Fri Feb 25, 2011 4:23 pm
by gonzothegreat
It's going at a much faster pace than I had anticipated, I need to order the rear shock and RO front springs (and other bits)....
Re: my NC30 rebuild....
Posted: Sat Feb 26, 2011 4:19 pm
by surfer 69-b
nice work looks realy clean to me
what shock are you going to use
i am considering one miself but get a little lost as what make to go with
like the nitron sport but wilders technoflex and wp do one for the rvf as wel
only problem with the nitron is i have to order in the uk
keep up the good work summer is coming
Re: my NC30 rebuild....
Posted: Sat Feb 26, 2011 4:21 pm
by gonzothegreat
surfer 69-b wrote:
what shock are you going to use
I'm going to order a Hagon shock, bike is for road use only (commuting) and will never see the track.
Re: my NC30 rebuild....
Posted: Sun Feb 27, 2011 1:56 pm
by gonzothegreat
I have bought the following off fleebay...
_WR's rearset
_Hagon shock
about to place a big order with RO

Re: my NC30 rebuild....
Posted: Sun Feb 27, 2011 3:16 pm
by Drunkn Munky
WR's...Respect
