VF500 Engine in an NC30
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Bike_Nut
- Settled in member
- Posts: 180
- Joined: Sun Oct 19, 2008 6:48 pm
Re: VF500 Engine in an NC30
Lets see if it works
-
Bike_Nut
- Settled in member
- Posts: 180
- Joined: Sun Oct 19, 2008 6:48 pm
-
Morespeedvicar
- Site Supporter
- Posts: 837
- Joined: Thu May 01, 2008 1:37 am
- Bike owned: Fzr400, NC30, CB50J, SS50Z KLR
- Location: Grimsby
Re: VF500 Engine in an NC30
Fantastic conversion there mate! keep up the good work and roll on the VFR4/750 conversion!!!!
Cheers
Ian
PS are you uprating the suspension aswell on the prilla?
Cheers
Ian
PS are you uprating the suspension aswell on the prilla?
-
Bike_Nut
- Settled in member
- Posts: 180
- Joined: Sun Oct 19, 2008 6:48 pm
Re: VF500 Engine in an NC30
My intention with this project was to build a supermono track bike for under £1000 so it limits what I really can spend on suspension. I am going to try swap the single brake fork bottoms of the 125 onto RS250 early forks as they are the same diameter. They are still not great forks but at least they have some damping adjustment and heavier springing. There is a bitubo shock available for the 125 which may be an option on the back.
Still, if you have ever watched Aprilia superteens these little bikes really can corner and are acknowledged as one of the fastest cornering bikes around so I hope it will be fun if nothing else. Nice to see a positive reaction to the project too!
Still, if you have ever watched Aprilia superteens these little bikes really can corner and are acknowledged as one of the fastest cornering bikes around so I hope it will be fun if nothing else. Nice to see a positive reaction to the project too!