Page 2 of 2

Re: 160/60 18 on rear of NC30

Posted: Sun Apr 29, 2012 7:41 am
by Wilson
I have just taken off a 160/60 BT016 as it was getting shagged, and I'm now on a 150/60 Dunlop Alpha.

The BT016 gave me no problems doing some decent times at the track (except when they started overheating a little when it was stinking hot), but from the time I first put the tyre on, I hated the profile. Being back at 150/60 is amazingly good.

Short answer: If you can get the right size instead, don't do it. The profile is far too flat and it sucks on the street and on the track. If it's the only size you can get, well, I guess it's better than riding on bare rim. Just.

Re: 160/60 18 on rear of NC30

Posted: Mon Apr 30, 2012 9:03 pm
by KZNX
:plus: cheers Wilson. 150/60/18's it is!

Re: 160/60 18 on rear of NC30

Posted: Thu May 31, 2012 1:12 am
by Hellmutt
BT016 at Ebisu Circuit, Japan this last weekend. Tire was spot on, couldn't ask for more.

Re: 160/60 18 on rear of NC30

Posted: Mon Jun 04, 2012 6:44 am
by bkk2009
It is a bit wider than stock, did anyone have any clearance problems, tire rubbing?

Re: 160/60 18 on rear of NC30

Posted: Wed Jun 06, 2012 9:57 pm
by woodsman
I just removed an Avon Storm st off a bike i bought as it was rubbing up against the chain.

Re: 160/60 18 on rear of NC30

Posted: Thu Jun 07, 2012 7:40 pm
by ColinP
Ive got a 160/60 BT10 on mine at the mo, no problems with the chain rubbing