Page 2 of 2

Re: Please clarify all engine differences between NC23 and N

Posted: Wed Dec 08, 2010 9:02 pm
by stenca
lloydspencer wrote:Thanks for that.

There is one NC29 engine on ebay atm. Very bad picture but can compar what bits I can see.

From what I can tell there isn't a water outlet on the back on the cylinders on the NC29

And the Clutch cover isn't gold and is slightly different.

NC29 engine picture please :)
Allright , here's a NC 29 : viewtopic.php?f=26&t=22316

Search the forum ... and you'll find everything you need
;)

Re: Please clarify all engine differences between NC23 and N

Posted: Wed Dec 08, 2010 9:49 pm
by Variablevalves suck
Like i said the Nc29 has barrel cast as part of the engine case were as on the 23 you can remove the barrel from the casing. The two are very different.

Re: Please clarify all engine differences between NC23 and N

Posted: Wed Dec 08, 2010 11:46 pm
by sa.racing
if your trying to identify/distinguish the engines from a picture then the only differences you will see are the NC23 engines have finned/ribbed engine cases where as the NC29 engine cases are smooth

observe.....

NC23 finned/ribbed
http://cgi.ebay.co.uk/HONDA-CBR-400-R-H ... 4153cac899

NC29 smooth
http://i237.photobucket.com/albums/ff29 ... r400rr.jpg

Re: Please clarify all engine differences between NC23 and N

Posted: Thu Dec 09, 2010 12:57 am
by Wozza
Good shout.
Got a link to the ebay auction?

Re: Please clarify all engine differences between NC23 and N

Posted: Thu Dec 09, 2010 11:20 am
by lloydspencer
I'm on my Iphone atm so can't go through all the hassle to copy the link etc but If I pick it up later I will upload pictures.

I am 95% sure I know what I am looking for.

Re: Please clarify all engine differences between NC23 and N

Posted: Thu Dec 09, 2010 9:40 pm
by lloydspencer
I picked it up this evening and everything worked out well. I paid £220 for a working NC29 engine with Carbies, Loom, coils and cdi, Airbox, New battery, new oil filter and radiator.

Quite happy really with it. Next week I will be cleaning it all up and looking at what work will need doing to it.