My shock has turned up with the sender.
Much joy and celebration.
Credit must go to M6rk, from whom I bought it and pursued the claim with the Royal Mail.
That's made my season,so far.

On the dyno today.
Was really nervous that the jetting would be a nightmare to get right.
I started with the 8ZF needles all round and 130f/132r mains.
Restricted air jets.
First run revealed the needles were seriously rich and the mains were seriously lean.
Didn't chance a WOT run.
Changed needles to 8ZG and 138f/140r mains.
Problems solved,still a tiny bit lean past 12,300rpm.
Serious linear curve, made 57bhp@12,300.
Next run was to the limiter but she blew coolant all over the place due to my knackered lower rad.
So never got to the limiter.
Needed 140f/142r main jets but I didn't have them,gutted.
Dyno man was well impressed with the results out of a bone stock motor.
So,I'm back again next week fully equipped and I'll have some graphs.
I'm very happy to say the least.

Superb...good to hear it man

Needing paint.
Out on Saturday,so paint can wait,I'll prime the tank alright.
There must have been 2kgs of old paint on it.
I think a silver tank is the way to go.
The RVF seat unit gives a lot more room.
I have an NC23 front wheel to add,have to paint it black to match the rear I have.
I'm liking the original gold colour,but it's easier paint it to match the rear.
Thanks to all on here for advice and parts.
It's go go go time.....