so the r6 reg rec will that just plug n play or will i need to do some tinkering

ChowderV4 wrote:so the r6 reg rec will that just plug n play or will i need to do some tinkering

Tinkering. But its hardly rocket science! EVERYONE seems to be putting R6 regs on bikes... CBR's, VFR's and everythign in between :D

If you get a Reg/Rec with the plug and some wires on it you can cut your existing wires and solder the R6 Plug onto it. Or if you just get the Reg/Rec on its own you can cut the Honda plug off and solder some spades on and use the spades (I do this)

Remember to solder the spades / wires though as they carry high ampage and any weak connection will cause it to get really hot.

http://www.cbrforum.com/forum/showthread.php?t=27739" onclick="window.open(this.href);return false;

Loads of Info there about using the reg/recs :)

Only 5 wires anyway.. 3 from Generator and 2 for power

cheers for all the info neo.
im looking at some r6 and gsxr reg/rec now

http://cgi.ebay.co.uk/Yamaha-R6-5SL-03- ... 230545c29c" onclick="window.open(this.href);return false;

Thats exactly the same as the ones I have.

5 Terminals.

-   -
- - -

Looking into the plug you'll wire it... Red (Top left) / Green (Top Right) then 3 yellows at the bottom (in any order)

http://cgi.ebay.co.uk/R6-5sl-model-03-0 ... 2a04a25f75" onclick="window.open(this.href);return false;

Buy it now for £25

haha, the first one is my bid on it and im watching that 2nd one.