bumped for the people that cannot do searches....

You know who you are...

I'm all thingers and fumbs. Ta :)

Happened to me tonight too. Where can you get a switchgear, is it specific nc30 part?

I couldn't find any on ebay, I'm taking it apart today to see if I can fix it.

There is another issue with the relay mod: will the regulator/rectifier be able to take the increased load?

krisztian_andre wrote:I couldn't find any on ebay, I'm taking it apart today to see if I can fix it.

Did you try Red Baron? Just asking. I'm going out there later this afternoon to pick up some parts, I'll ask if they have NC30 switch gear.

I was there today but I couldn't find one in the used lot, they said something about ordering one but I forgot to ask the price. Can you please ask them about the price?

Thanks,
Chris

Yeah, I had luck at RB either. They said left-hand-side switch gear for the NC30 is hard to find. I didn't see your post in time to ask the price but I'd assume expensive ... most of their stuff is. I will ask around tho.

Jimmy

krisztian_andre wrote:There is another issue with the relay mod: will the regulator/rectifier be able to take the increased load?

The UK / Japanese bikes use the same generator. (350watts) so the potential output is the same

The 35/60 watts stil output the same on high beam (120 watts) as the 55/60 H4's do, so I don't think you'll be over-loading the reg/reg on low beam (110 was as oppsed to 70 watts) as it it still less than High Beam

31600MR8601 is the partnumber of the EU bike Reg/Rec

31600-KY2-702
31600-KY2-703
31600-MV4-000

Are the 3 types of Reg/Rec's fitted on Japanese bikes.

I use a R6 reg/rec as it is more reliable than all of the above.

Any of the above reg's should be fine though.

R6, any year?