Running rich?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
therefused
- Settled in member
- Posts: 10
- Joined: Mon Jul 20, 2009 4:47 pm
Re: Running rich?
what size are the original washers?
also how come the main jets are bigger in the front than the rear, wouldnt it make sense them be the same all round??
also how come the main jets are bigger in the front than the rear, wouldnt it make sense them be the same all round??
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: Running rich?
The original washers are about 0.5mm thick.
The rear carbs are jetted bigger (richer) as they receive less cooling. Many inline moto engines also have a similar arrangement where the middle two cylinders are jetted richer.
The rear carbs are jetted bigger (richer) as they receive less cooling. Many inline moto engines also have a similar arrangement where the middle two cylinders are jetted richer.
"It's just a ride" Bill Hicks