indeed , but the polished swing arm isnt on yet will put that on when i replace the chain, the gaurds will be resprayed when i do the fairing in a few months, still quite a bit of work to do , but the funds just arnt there at the mo, plus im in the middle of a cb750 restoration,

Just do it....

hehe nice!!!!! worth all the effort ay parus :D

Nice work on that rear wheel.

How long did it take to complete both wheels?

One more - hot to polish the fuel tank cap. No idea how to do this in case it's possible.

PARUS wrote:One more - hot to polish the fuel tank cap. No idea how to do this in case it's possible.

I've done mine in the past. I used an 8" bench grinder with mops. The only issue I had was getting a good finish on the little grooves around the outside of it. Other than that, quite easy. A good tip for preparation before polishing is remove paint/anodising/coating with acid or caustic soda - very quick and easy. Otherwise, you can just use the bench grinder to tear through it with the mops on.

I don't polish much these days though - too much upkeep. Everyone knows that black is the new polished

indeed this is it finished but unfotunuly up for sale, trying to fund the 690smc