The diamond race ones are quite nice, not (thankfully) tested crashing with them though...


Druid

Have the Thai ones on my bike and had them on my track bike. I've 'tested' them and really rate them. Maybe its just me but I like them.

Like Mr Stickshift, I'd have WR's if not for having these ones I have.

SES mate. the race bike standard no frills fixed rearsets.
they look like the cheap ebay 90 quiders, but they are better.
https://sslsecurity.co.uk/AandrracingV2 ... &CatID=143" onclick="window.open(this.href);return false;

these just turned up in the post . . .

http://cgi.ebay.co.uk/Universal-Yoshimu ... 1|294%3A50

i must say at first glance they knock spots off the 99 quiders !! only downside is they come with no jack/mounting plates . . . but come on, only £40 delivered !! theyre ballraced and everything!!

lots of machining marks but nothing a little wet'n'dry and an hour on the mop wont fix . . .

the shift rod is a nice peice of ally hex turned round in the center, although both rosejoints are not only cheap and nasty but have right hand threads !! so adjustment means disconecting one end . . .

photos to come . . .

I was looking for some new sets about 6 months ago and really exhausted all possibilities.....
If you are looking for quality, good value sets I'd go for the Ses sets off Rick Oliver (full replacement parts incase of accident!!) plus lots of options.
The others worth looking at are the WR rear sets - real nice looking and apparently very smooth.
I found a supplier for the WR sets, i'll dig out the website and post it.
Good luck!

ok, the website - http://www.maxmcdirect.com/products.asp?cat=22&pg=2" onclick="window.open(this.href);return false;

Another one for the WR's, I had a set on my RVF and they were very smooth and grippy, they just feel like a quality item, they even crashed fairly well.

Found these on ebay thought maybe worth a look!! cheap enough and solid alloy!!

http://cgi.ebay.co.uk/Honda-NC30-RVF-40 ... 7C294%3A50

here are those pictures . . .

£25.90 + £15.00 p&p awsome !!



this shows up the machine marks . . . ive already started to polish the bottom one!!



stainless ballraces



heres the dodgy rose joints . . . still gonna use the shift rod i think . . .



now i just gotta make up some jack plates !!

EsKee wrote: heres the dodgy rose joints . . . still gonna use the shift rod i think . . .

hey mate, I've got all sorts of rose joints from the mob below, cheap prices and high quality products.

Just make sure to order the right size and thread direction you need.

http://stores.shop.ebay.co.uk/McGill-Mo ... QQ_armrsZ1" onclick="window.open(this.href);return false;

Cheers for all the replies!!
I'm pretty keen on the WR's - I like the look of them more than the cheap ebay ones and the tyga/ses/diamond are all too expensive for me at the mo!!!!
Watch this space as I'll review them once they are bought and fitted

Smev