RVF400 - Jack the back or lower the front ???
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
tanuki
- Site Supporter
- Posts: 1571
- Joined: Wed Apr 30, 2008 4:47 pm
- Bike owned: CCM404 SM, CBR4/6 in progress
- Location: Nottingham U.K
Re: RVF400 - Jack the back or lower the front ???
Rick Oliver sells nicely machined 9mm jack up washer thing for the 35 its an exact copy of the HRC one but without the little slot, all I did with mine was cut the slot in loosten the shock fit the plate tighten the shock took about an hour all together.blackcat wrote:Thanks guys, great replies. I have an alloy washer which is 1 cm thick but I may go the route and buy one of the alloy plates off eblag..save removing shock etc.
EDIT:- Dammit sodden thing isn't on Ebay anymore
-
blackcat
- Settled in member
- Posts: 16
- Joined: Wed Apr 30, 2008 5:23 pm
Re: RVF400 - Jack the back or lower the front ???
Garry, guy from Ebay, has contacted me and I've sent my hard earned pennies off to him........jack up here I come !!!
EDIT..and it came two days later...excellant service :-) Only took 30 minutes to fit...and she turns in nicely now :)
EDIT..and it came two days later...excellant service :-) Only took 30 minutes to fit...and she turns in nicely now :)